X-Git-Url: http://47.100.26.94:8080/?a=blobdiff_plain;ds=inline;f=third_party%2Fsdl%2Finclude%2FSDL2%2FSDL_hints.h;fp=third_party%2Fsdl%2Finclude%2FSDL2%2FSDL_hints.h;h=3834640f2dfbe51fc08027baf45a3de0adab2e46;hb=7de7c3da29277838e63b63ffd2512b4014b90fa7;hp=0000000000000000000000000000000000000000;hpb=6f9d61a8fc090e669369ec1279818e0c3543313d;p=yuv-player.git diff --git a/third_party/sdl/include/SDL2/SDL_hints.h b/third_party/sdl/include/SDL2/SDL_hints.h new file mode 100644 index 0000000..3834640 --- /dev/null +++ b/third_party/sdl/include/SDL2/SDL_hints.h @@ -0,0 +1,1022 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2018 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_hints.h + * + * Official documentation for SDL configuration variables + * + * This file contains functions to set and get configuration hints, + * as well as listing each of them alphabetically. + * + * The convention for naming hints is SDL_HINT_X, where "SDL_X" is + * the environment variable that can be used to override the default. + * + * In general these hints are just that - they may or may not be + * supported or applicable on any given platform, but they provide + * a way for an application or user to give the library a hint as + * to how they would like the library to work. + */ + +#ifndef SDL_hints_h_ +#define SDL_hints_h_ + +#include "SDL_stdinc.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief A variable controlling how 3D acceleration is used to accelerate the SDL screen surface. + * + * SDL can try to accelerate the SDL screen surface by using streaming + * textures with a 3D rendering engine. This variable controls whether and + * how this is done. + * + * This variable can be set to the following values: + * "0" - Disable 3D acceleration + * "1" - Enable 3D acceleration, using the default renderer. + * "X" - Enable 3D acceleration, using X where X is one of the valid rendering drivers. (e.g. "direct3d", "opengl", etc.) + * + * By default SDL tries to make a best guess for each platform whether + * to use acceleration or not. + */ +#define SDL_HINT_FRAMEBUFFER_ACCELERATION "SDL_FRAMEBUFFER_ACCELERATION" + +/** + * \brief A variable specifying which render driver to use. + * + * If the application doesn't pick a specific renderer to use, this variable + * specifies the name of the preferred renderer. If the preferred renderer + * can't be initialized, the normal default renderer is used. + * + * This variable is case insensitive and can be set to the following values: + * "direct3d" + * "opengl" + * "opengles2" + * "opengles" + * "metal" + * "software" + * + * The default varies by platform, but it's the first one in the list that + * is available on the current platform. + */ +#define SDL_HINT_RENDER_DRIVER "SDL_RENDER_DRIVER" + +/** + * \brief A variable controlling whether the OpenGL render driver uses shaders if they are available. + * + * This variable can be set to the following values: + * "0" - Disable shaders + * "1" - Enable shaders + * + * By default shaders are used if OpenGL supports them. + */ +#define SDL_HINT_RENDER_OPENGL_SHADERS "SDL_RENDER_OPENGL_SHADERS" + +/** + * \brief A variable controlling whether the Direct3D device is initialized for thread-safe operations. + * + * This variable can be set to the following values: + * "0" - Thread-safety is not enabled (faster) + * "1" - Thread-safety is enabled + * + * By default the Direct3D device is created with thread-safety disabled. + */ +#define SDL_HINT_RENDER_DIRECT3D_THREADSAFE "SDL_RENDER_DIRECT3D_THREADSAFE" + +/** + * \brief A variable controlling whether to enable Direct3D 11+'s Debug Layer. + * + * This variable does not have any effect on the Direct3D 9 based renderer. + * + * This variable can be set to the following values: + * "0" - Disable Debug Layer use + * "1" - Enable Debug Layer use + * + * By default, SDL does not use Direct3D Debug Layer. + */ +#define SDL_HINT_RENDER_DIRECT3D11_DEBUG "SDL_RENDER_DIRECT3D11_DEBUG" + +/** + * \brief A variable controlling the scaling policy for SDL_RenderSetLogicalSize. + * + * This variable can be set to the following values: + * "0" or "letterbox" - Uses letterbox/sidebars to fit the entire rendering on screen + * "1" or "overscan" - Will zoom the rendering so it fills the entire screen, allowing edges to be drawn offscreen + * + * By default letterbox is used + */ +#define SDL_HINT_RENDER_LOGICAL_SIZE_MODE "SDL_RENDER_LOGICAL_SIZE_MODE" + +/** + * \brief A variable controlling the scaling quality + * + * This variable can be set to the following values: + * "0" or "nearest" - Nearest pixel sampling + * "1" or "linear" - Linear filtering (supported by OpenGL and Direct3D) + * "2" or "best" - Currently this is the same as "linear" + * + * By default nearest pixel sampling is used + */ +#define SDL_HINT_RENDER_SCALE_QUALITY "SDL_RENDER_SCALE_QUALITY" + +/** + * \brief A variable controlling whether updates to the SDL screen surface should be synchronized with the vertical refresh, to avoid tearing. + * + * This variable can be set to the following values: + * "0" - Disable vsync + * "1" - Enable vsync + * + * By default SDL does not sync screen surface updates with vertical refresh. + */ +#define SDL_HINT_RENDER_VSYNC "SDL_RENDER_VSYNC" + +/** + * \brief A variable controlling whether the screensaver is enabled. + * + * This variable can be set to the following values: + * "0" - Disable screensaver + * "1" - Enable screensaver + * + * By default SDL will disable the screensaver. + */ +#define SDL_HINT_VIDEO_ALLOW_SCREENSAVER "SDL_VIDEO_ALLOW_SCREENSAVER" + +/** + * \brief A variable controlling whether the X11 VidMode extension should be used. + * + * This variable can be set to the following values: + * "0" - Disable XVidMode + * "1" - Enable XVidMode + * + * By default SDL will use XVidMode if it is available. + */ +#define SDL_HINT_VIDEO_X11_XVIDMODE "SDL_VIDEO_X11_XVIDMODE" + +/** + * \brief A variable controlling whether the X11 Xinerama extension should be used. + * + * This variable can be set to the following values: + * "0" - Disable Xinerama + * "1" - Enable Xinerama + * + * By default SDL will use Xinerama if it is available. + */ +#define SDL_HINT_VIDEO_X11_XINERAMA "SDL_VIDEO_X11_XINERAMA" + +/** + * \brief A variable controlling whether the X11 XRandR extension should be used. + * + * This variable can be set to the following values: + * "0" - Disable XRandR + * "1" - Enable XRandR + * + * By default SDL will not use XRandR because of window manager issues. + */ +#define SDL_HINT_VIDEO_X11_XRANDR "SDL_VIDEO_X11_XRANDR" + +/** + * \brief A variable controlling whether the X11 _NET_WM_PING protocol should be supported. + * + * This variable can be set to the following values: + * "0" - Disable _NET_WM_PING + * "1" - Enable _NET_WM_PING + * + * By default SDL will use _NET_WM_PING, but for applications that know they + * will not always be able to respond to ping requests in a timely manner they can + * turn it off to avoid the window manager thinking the app is hung. + * The hint is checked in CreateWindow. + */ +#define SDL_HINT_VIDEO_X11_NET_WM_PING "SDL_VIDEO_X11_NET_WM_PING" + +/** + * \brief A variable controlling whether the X11 _NET_WM_BYPASS_COMPOSITOR hint should be used. + * + * This variable can be set to the following values: + * "0" - Disable _NET_WM_BYPASS_COMPOSITOR + * "1" - Enable _NET_WM_BYPASS_COMPOSITOR + * + * By default SDL will use _NET_WM_BYPASS_COMPOSITOR + * + */ +#define SDL_HINT_VIDEO_X11_NET_WM_BYPASS_COMPOSITOR "SDL_VIDEO_X11_NET_WM_BYPASS_COMPOSITOR" + +/** + * \brief A variable controlling whether the window frame and title bar are interactive when the cursor is hidden + * + * This variable can be set to the following values: + * "0" - The window frame is not interactive when the cursor is hidden (no move, resize, etc) + * "1" - The window frame is interactive when the cursor is hidden + * + * By default SDL will allow interaction with the window frame when the cursor is hidden + */ +#define SDL_HINT_WINDOW_FRAME_USABLE_WHILE_CURSOR_HIDDEN "SDL_WINDOW_FRAME_USABLE_WHILE_CURSOR_HIDDEN" + +/** + * \brief A variable to specify custom icon resource id from RC file on Windows platform + */ +#define SDL_HINT_WINDOWS_INTRESOURCE_ICON "SDL_WINDOWS_INTRESOURCE_ICON" +#define SDL_HINT_WINDOWS_INTRESOURCE_ICON_SMALL "SDL_WINDOWS_INTRESOURCE_ICON_SMALL" + +/** + * \brief A variable controlling whether the windows message loop is processed by SDL + * + * This variable can be set to the following values: + * "0" - The window message loop is not run + * "1" - The window message loop is processed in SDL_PumpEvents() + * + * By default SDL will process the windows message loop + */ +#define SDL_HINT_WINDOWS_ENABLE_MESSAGELOOP "SDL_WINDOWS_ENABLE_MESSAGELOOP" + +/** + * \brief A variable controlling whether grabbing input grabs the keyboard + * + * This variable can be set to the following values: + * "0" - Grab will affect only the mouse + * "1" - Grab will affect mouse and keyboard + * + * By default SDL will not grab the keyboard so system shortcuts still work. + */ +#define SDL_HINT_GRAB_KEYBOARD "SDL_GRAB_KEYBOARD" + +/** + * \brief A variable setting the speed scale for mouse motion, in floating point, when the mouse is not in relative mode + */ +#define SDL_HINT_MOUSE_NORMAL_SPEED_SCALE "SDL_MOUSE_NORMAL_SPEED_SCALE" + +/** + * \brief A variable setting the scale for mouse motion, in floating point, when the mouse is in relative mode + */ +#define SDL_HINT_MOUSE_RELATIVE_SPEED_SCALE "SDL_MOUSE_RELATIVE_SPEED_SCALE" + +/** + * \brief A variable controlling whether relative mouse mode is implemented using mouse warping + * + * This variable can be set to the following values: + * "0" - Relative mouse mode uses raw input + * "1" - Relative mouse mode uses mouse warping + * + * By default SDL will use raw input for relative mouse mode + */ +#define SDL_HINT_MOUSE_RELATIVE_MODE_WARP "SDL_MOUSE_RELATIVE_MODE_WARP" + +/** + * \brief Allow mouse click events when clicking to focus an SDL window + * + * This variable can be set to the following values: + * "0" - Ignore mouse clicks that activate a window + * "1" - Generate events for mouse clicks that activate a window + * + * By default SDL will ignore mouse clicks that activate a window + */ +#define SDL_HINT_MOUSE_FOCUS_CLICKTHROUGH "SDL_MOUSE_FOCUS_CLICKTHROUGH" + +/** + * \brief A variable controlling whether touch events should generate synthetic mouse events + * + * This variable can be set to the following values: + * "0" - Touch events will not generate mouse events + * "1" - Touch events will generate mouse events + * + * By default SDL will generate mouse events for touch events + */ +#define SDL_HINT_TOUCH_MOUSE_EVENTS "SDL_TOUCH_MOUSE_EVENTS" + +/** + * \brief Minimize your SDL_Window if it loses key focus when in fullscreen mode. Defaults to true. + * + */ +#define SDL_HINT_VIDEO_MINIMIZE_ON_FOCUS_LOSS "SDL_VIDEO_MINIMIZE_ON_FOCUS_LOSS" + +/** + * \brief A variable controlling whether the idle timer is disabled on iOS. + * + * When an iOS app does not receive touches for some time, the screen is + * dimmed automatically. For games where the accelerometer is the only input + * this is problematic. This functionality can be disabled by setting this + * hint. + * + * As of SDL 2.0.4, SDL_EnableScreenSaver() and SDL_DisableScreenSaver() + * accomplish the same thing on iOS. They should be preferred over this hint. + * + * This variable can be set to the following values: + * "0" - Enable idle timer + * "1" - Disable idle timer + */ +#define SDL_HINT_IDLE_TIMER_DISABLED "SDL_IOS_IDLE_TIMER_DISABLED" + +/** + * \brief A variable controlling which orientations are allowed on iOS. + * + * In some circumstances it is necessary to be able to explicitly control + * which UI orientations are allowed. + * + * This variable is a space delimited list of the following values: + * "LandscapeLeft", "LandscapeRight", "Portrait" "PortraitUpsideDown" + */ +#define SDL_HINT_ORIENTATIONS "SDL_IOS_ORIENTATIONS" + +/** + * \brief A variable controlling whether controllers used with the Apple TV + * generate UI events. + * + * When UI events are generated by controller input, the app will be + * backgrounded when the Apple TV remote's menu button is pressed, and when the + * pause or B buttons on gamepads are pressed. + * + * More information about properly making use of controllers for the Apple TV + * can be found here: + * https://developer.apple.com/tvos/human-interface-guidelines/remote-and-controllers/ + * + * This variable can be set to the following values: + * "0" - Controller input does not generate UI events (the default). + * "1" - Controller input generates UI events. + */ +#define SDL_HINT_APPLE_TV_CONTROLLER_UI_EVENTS "SDL_APPLE_TV_CONTROLLER_UI_EVENTS" + +/** + * \brief A variable controlling whether the Apple TV remote's joystick axes + * will automatically match the rotation of the remote. + * + * This variable can be set to the following values: + * "0" - Remote orientation does not affect joystick axes (the default). + * "1" - Joystick axes are based on the orientation of the remote. + */ +#define SDL_HINT_APPLE_TV_REMOTE_ALLOW_ROTATION "SDL_APPLE_TV_REMOTE_ALLOW_ROTATION" + +/** + * \brief A variable controlling whether the home indicator bar on iPhone X + * should be hidden. + * + * This variable can be set to the following values: + * "0" - The indicator bar is not hidden (default for windowed applications) + * "1" - The indicator bar is hidden and is shown when the screen is touched (useful for movie playback applications) + * "2" - The indicator bar is dim and the first swipe makes it visible and the second swipe performs the "home" action (default for fullscreen applications) + */ +#define SDL_HINT_IOS_HIDE_HOME_INDICATOR "SDL_IOS_HIDE_HOME_INDICATOR" + +/** + * \brief A variable controlling whether the Android / iOS built-in + * accelerometer should be listed as a joystick device. + * + * This variable can be set to the following values: + * "0" - The accelerometer is not listed as a joystick + * "1" - The accelerometer is available as a 3 axis joystick (the default). + */ +#define SDL_HINT_ACCELEROMETER_AS_JOYSTICK "SDL_ACCELEROMETER_AS_JOYSTICK" + +/** + * \brief A variable controlling whether the Android / tvOS remotes + * should be listed as joystick devices, instead of sending keyboard events. + * + * This variable can be set to the following values: + * "0" - Remotes send enter/escape/arrow key events + * "1" - Remotes are available as 2 axis, 2 button joysticks (the default). + */ +#define SDL_HINT_TV_REMOTE_AS_JOYSTICK "SDL_TV_REMOTE_AS_JOYSTICK" + +/** + * \brief A variable that lets you disable the detection and use of Xinput gamepad devices + * + * The variable can be set to the following values: + * "0" - Disable XInput detection (only uses direct input) + * "1" - Enable XInput detection (the default) + */ +#define SDL_HINT_XINPUT_ENABLED "SDL_XINPUT_ENABLED" + +/** + * \brief A variable that causes SDL to use the old axis and button mapping for XInput devices. + * + * This hint is for backwards compatibility only and will be removed in SDL 2.1 + * + * The default value is "0". This hint must be set before SDL_Init() + */ +#define SDL_HINT_XINPUT_USE_OLD_JOYSTICK_MAPPING "SDL_XINPUT_USE_OLD_JOYSTICK_MAPPING" + +/** + * \brief A variable that lets you manually hint extra gamecontroller db entries. + * + * The variable should be newline delimited rows of gamecontroller config data, see SDL_gamecontroller.h + * + * This hint must be set before calling SDL_Init(SDL_INIT_GAMECONTROLLER) + * You can update mappings after the system is initialized with SDL_GameControllerMappingForGUID() and SDL_GameControllerAddMapping() + */ +#define SDL_HINT_GAMECONTROLLERCONFIG "SDL_GAMECONTROLLERCONFIG" + +/** + * \brief A variable containing a list of devices to skip when scanning for game controllers. + * + * The format of the string is a comma separated list of USB VID/PID pairs + * in hexadecimal form, e.g. + * + * 0xAAAA/0xBBBB,0xCCCC/0xDDDD + * + * The variable can also take the form of @file, in which case the named + * file will be loaded and interpreted as the value of the variable. + */ +#define SDL_HINT_GAMECONTROLLER_IGNORE_DEVICES "SDL_GAMECONTROLLER_IGNORE_DEVICES" + +/** + * \brief If set, all devices will be skipped when scanning for game controllers except for the ones listed in this variable. + * + * The format of the string is a comma separated list of USB VID/PID pairs + * in hexadecimal form, e.g. + * + * 0xAAAA/0xBBBB,0xCCCC/0xDDDD + * + * The variable can also take the form of @file, in which case the named + * file will be loaded and interpreted as the value of the variable. + */ +#define SDL_HINT_GAMECONTROLLER_IGNORE_DEVICES_EXCEPT "SDL_GAMECONTROLLER_IGNORE_DEVICES_EXCEPT" + +/** + * \brief A variable that lets you enable joystick (and gamecontroller) events even when your app is in the background. + * + * The variable can be set to the following values: + * "0" - Disable joystick & gamecontroller input events when the + * application is in the background. + * "1" - Enable joystick & gamecontroller input events when the + * application is in the background. + * + * The default value is "0". This hint may be set at any time. + */ +#define SDL_HINT_JOYSTICK_ALLOW_BACKGROUND_EVENTS "SDL_JOYSTICK_ALLOW_BACKGROUND_EVENTS" + +/** + * \brief If set to "0" then never set the top most bit on a SDL Window, even if the video mode expects it. + * This is a debugging aid for developers and not expected to be used by end users. The default is "1" + * + * This variable can be set to the following values: + * "0" - don't allow topmost + * "1" - allow topmost + */ +#define SDL_HINT_ALLOW_TOPMOST "SDL_ALLOW_TOPMOST" + +/** + * \brief A variable that controls the timer resolution, in milliseconds. + * + * The higher resolution the timer, the more frequently the CPU services + * timer interrupts, and the more precise delays are, but this takes up + * power and CPU time. This hint is only used on Windows 7 and earlier. + * + * See this blog post for more information: + * http://randomascii.wordpress.com/2013/07/08/windows-timer-resolution-megawatts-wasted/ + * + * If this variable is set to "0", the system timer resolution is not set. + * + * The default value is "1". This hint may be set at any time. + */ +#define SDL_HINT_TIMER_RESOLUTION "SDL_TIMER_RESOLUTION" + + +/** + * \brief A variable describing the content orientation on QtWayland-based platforms. + * + * On QtWayland platforms, windows are rotated client-side to allow for custom + * transitions. In order to correctly position overlays (e.g. volume bar) and + * gestures (e.g. events view, close/minimize gestures), the system needs to + * know in which orientation the application is currently drawing its contents. + * + * This does not cause the window to be rotated or resized, the application + * needs to take care of drawing the content in the right orientation (the + * framebuffer is always in portrait mode). + * + * This variable can be one of the following values: + * "primary" (default), "portrait", "landscape", "inverted-portrait", "inverted-landscape" + */ +#define SDL_HINT_QTWAYLAND_CONTENT_ORIENTATION "SDL_QTWAYLAND_CONTENT_ORIENTATION" + +/** + * \brief Flags to set on QtWayland windows to integrate with the native window manager. + * + * On QtWayland platforms, this hint controls the flags to set on the windows. + * For example, on Sailfish OS "OverridesSystemGestures" disables swipe gestures. + * + * This variable is a space-separated list of the following values (empty = no flags): + * "OverridesSystemGestures", "StaysOnTop", "BypassWindowManager" + */ +#define SDL_HINT_QTWAYLAND_WINDOW_FLAGS "SDL_QTWAYLAND_WINDOW_FLAGS" + +/** +* \brief A string specifying SDL's threads stack size in bytes or "0" for the backend's default size +* +* Use this hint in case you need to set SDL's threads stack size to other than the default. +* This is specially useful if you build SDL against a non glibc libc library (such as musl) which +* provides a relatively small default thread stack size (a few kilobytes versus the default 8MB glibc uses). +* Support for this hint is currently available only in the pthread, Windows, and PSP backend. +*/ +#define SDL_HINT_THREAD_STACK_SIZE "SDL_THREAD_STACK_SIZE" + +/** + * \brief If set to 1, then do not allow high-DPI windows. ("Retina" on Mac and iOS) + */ +#define SDL_HINT_VIDEO_HIGHDPI_DISABLED "SDL_VIDEO_HIGHDPI_DISABLED" + +/** + * \brief A variable that determines whether ctrl+click should generate a right-click event on Mac + * + * If present, holding ctrl while left clicking will generate a right click + * event when on Mac. + */ +#define SDL_HINT_MAC_CTRL_CLICK_EMULATE_RIGHT_CLICK "SDL_MAC_CTRL_CLICK_EMULATE_RIGHT_CLICK" + +/** +* \brief A variable specifying which shader compiler to preload when using the Chrome ANGLE binaries +* +* SDL has EGL and OpenGL ES2 support on Windows via the ANGLE project. It +* can use two different sets of binaries, those compiled by the user from source +* or those provided by the Chrome browser. In the later case, these binaries require +* that SDL loads a DLL providing the shader compiler. +* +* This variable can be set to the following values: +* "d3dcompiler_46.dll" - default, best for Vista or later. +* "d3dcompiler_43.dll" - for XP support. +* "none" - do not load any library, useful if you compiled ANGLE from source and included the compiler in your binaries. +* +*/ +#define SDL_HINT_VIDEO_WIN_D3DCOMPILER "SDL_VIDEO_WIN_D3DCOMPILER" + +/** +* \brief A variable that is the address of another SDL_Window* (as a hex string formatted with "%p"). +* +* If this hint is set before SDL_CreateWindowFrom() and the SDL_Window* it is set to has +* SDL_WINDOW_OPENGL set (and running on WGL only, currently), then two things will occur on the newly +* created SDL_Window: +* +* 1. Its pixel format will be set to the same pixel format as this SDL_Window. This is +* needed for example when sharing an OpenGL context across multiple windows. +* +* 2. The flag SDL_WINDOW_OPENGL will be set on the new window so it can be used for +* OpenGL rendering. +* +* This variable can be set to the following values: +* The address (as a string "%p") of the SDL_Window* that new windows created with SDL_CreateWindowFrom() should +* share a pixel format with. +*/ +#define SDL_HINT_VIDEO_WINDOW_SHARE_PIXEL_FORMAT "SDL_VIDEO_WINDOW_SHARE_PIXEL_FORMAT" + +/** + * \brief A URL to a WinRT app's privacy policy + * + * All network-enabled WinRT apps must make a privacy policy available to its + * users. On Windows 8, 8.1, and RT, Microsoft mandates that this policy be + * be available in the Windows Settings charm, as accessed from within the app. + * SDL provides code to add a URL-based link there, which can point to the app's + * privacy policy. + * + * To setup a URL to an app's privacy policy, set SDL_HINT_WINRT_PRIVACY_POLICY_URL + * before calling any SDL_Init() functions. The contents of the hint should + * be a valid URL. For example, "http://www.example.com". + * + * The default value is "", which will prevent SDL from adding a privacy policy + * link to the Settings charm. This hint should only be set during app init. + * + * The label text of an app's "Privacy Policy" link may be customized via another + * hint, SDL_HINT_WINRT_PRIVACY_POLICY_LABEL. + * + * Please note that on Windows Phone, Microsoft does not provide standard UI + * for displaying a privacy policy link, and as such, SDL_HINT_WINRT_PRIVACY_POLICY_URL + * will not get used on that platform. Network-enabled phone apps should display + * their privacy policy through some other, in-app means. + */ +#define SDL_HINT_WINRT_PRIVACY_POLICY_URL "SDL_WINRT_PRIVACY_POLICY_URL" + +/** \brief Label text for a WinRT app's privacy policy link + * + * Network-enabled WinRT apps must include a privacy policy. On Windows 8, 8.1, and RT, + * Microsoft mandates that this policy be available via the Windows Settings charm. + * SDL provides code to add a link there, with its label text being set via the + * optional hint, SDL_HINT_WINRT_PRIVACY_POLICY_LABEL. + * + * Please note that a privacy policy's contents are not set via this hint. A separate + * hint, SDL_HINT_WINRT_PRIVACY_POLICY_URL, is used to link to the actual text of the + * policy. + * + * The contents of this hint should be encoded as a UTF8 string. + * + * The default value is "Privacy Policy". This hint should only be set during app + * initialization, preferably before any calls to SDL_Init(). + * + * For additional information on linking to a privacy policy, see the documentation for + * SDL_HINT_WINRT_PRIVACY_POLICY_URL. + */ +#define SDL_HINT_WINRT_PRIVACY_POLICY_LABEL "SDL_WINRT_PRIVACY_POLICY_LABEL" + +/** \brief Allows back-button-press events on Windows Phone to be marked as handled + * + * Windows Phone devices typically feature a Back button. When pressed, + * the OS will emit back-button-press events, which apps are expected to + * handle in an appropriate manner. If apps do not explicitly mark these + * events as 'Handled', then the OS will invoke its default behavior for + * unhandled back-button-press events, which on Windows Phone 8 and 8.1 is to + * terminate the app (and attempt to switch to the previous app, or to the + * device's home screen). + * + * Setting the SDL_HINT_WINRT_HANDLE_BACK_BUTTON hint to "1" will cause SDL + * to mark back-button-press events as Handled, if and when one is sent to + * the app. + * + * Internally, Windows Phone sends back button events as parameters to + * special back-button-press callback functions. Apps that need to respond + * to back-button-press events are expected to register one or more + * callback functions for such, shortly after being launched (during the + * app's initialization phase). After the back button is pressed, the OS + * will invoke these callbacks. If the app's callback(s) do not explicitly + * mark the event as handled by the time they return, or if the app never + * registers one of these callback, the OS will consider the event + * un-handled, and it will apply its default back button behavior (terminate + * the app). + * + * SDL registers its own back-button-press callback with the Windows Phone + * OS. This callback will emit a pair of SDL key-press events (SDL_KEYDOWN + * and SDL_KEYUP), each with a scancode of SDL_SCANCODE_AC_BACK, after which + * it will check the contents of the hint, SDL_HINT_WINRT_HANDLE_BACK_BUTTON. + * If the hint's value is set to "1", the back button event's Handled + * property will get set to 'true'. If the hint's value is set to something + * else, or if it is unset, SDL will leave the event's Handled property + * alone. (By default, the OS sets this property to 'false', to note.) + * + * SDL apps can either set SDL_HINT_WINRT_HANDLE_BACK_BUTTON well before a + * back button is pressed, or can set it in direct-response to a back button + * being pressed. + * + * In order to get notified when a back button is pressed, SDL apps should + * register a callback function with SDL_AddEventWatch(), and have it listen + * for SDL_KEYDOWN events that have a scancode of SDL_SCANCODE_AC_BACK. + * (Alternatively, SDL_KEYUP events can be listened-for. Listening for + * either event type is suitable.) Any value of SDL_HINT_WINRT_HANDLE_BACK_BUTTON + * set by such a callback, will be applied to the OS' current + * back-button-press event. + * + * More details on back button behavior in Windows Phone apps can be found + * at the following page, on Microsoft's developer site: + * http://msdn.microsoft.com/en-us/library/windowsphone/develop/jj247550(v=vs.105).aspx + */ +#define SDL_HINT_WINRT_HANDLE_BACK_BUTTON "SDL_WINRT_HANDLE_BACK_BUTTON" + +/** + * \brief A variable that dictates policy for fullscreen Spaces on Mac OS X. + * + * This hint only applies to Mac OS X. + * + * The variable can be set to the following values: + * "0" - Disable Spaces support (FULLSCREEN_DESKTOP won't use them and + * SDL_WINDOW_RESIZABLE windows won't offer the "fullscreen" + * button on their titlebars). + * "1" - Enable Spaces support (FULLSCREEN_DESKTOP will use them and + * SDL_WINDOW_RESIZABLE windows will offer the "fullscreen" + * button on their titlebars). + * + * The default value is "1". Spaces are disabled regardless of this hint if + * the OS isn't at least Mac OS X Lion (10.7). This hint must be set before + * any windows are created. + */ +#define SDL_HINT_VIDEO_MAC_FULLSCREEN_SPACES "SDL_VIDEO_MAC_FULLSCREEN_SPACES" + +/** +* \brief When set don't force the SDL app to become a foreground process +* +* This hint only applies to Mac OS X. +* +*/ +#define SDL_HINT_MAC_BACKGROUND_APP "SDL_MAC_BACKGROUND_APP" + +/** + * \brief Android APK expansion main file version. Should be a string number like "1", "2" etc. + * + * Must be set together with SDL_HINT_ANDROID_APK_EXPANSION_PATCH_FILE_VERSION. + * + * If both hints were set then SDL_RWFromFile() will look into expansion files + * after a given relative path was not found in the internal storage and assets. + * + * By default this hint is not set and the APK expansion files are not searched. + */ +#define SDL_HINT_ANDROID_APK_EXPANSION_MAIN_FILE_VERSION "SDL_ANDROID_APK_EXPANSION_MAIN_FILE_VERSION" + +/** + * \brief Android APK expansion patch file version. Should be a string number like "1", "2" etc. + * + * Must be set together with SDL_HINT_ANDROID_APK_EXPANSION_MAIN_FILE_VERSION. + * + * If both hints were set then SDL_RWFromFile() will look into expansion files + * after a given relative path was not found in the internal storage and assets. + * + * By default this hint is not set and the APK expansion files are not searched. + */ +#define SDL_HINT_ANDROID_APK_EXPANSION_PATCH_FILE_VERSION "SDL_ANDROID_APK_EXPANSION_PATCH_FILE_VERSION" + +/** + * \brief A variable to control whether certain IMEs should handle text editing internally instead of sending SDL_TEXTEDITING events. + * + * The variable can be set to the following values: + * "0" - SDL_TEXTEDITING events are sent, and it is the application's + * responsibility to render the text from these events and + * differentiate it somehow from committed text. (default) + * "1" - If supported by the IME then SDL_TEXTEDITING events are not sent, + * and text that is being composed will be rendered in its own UI. + */ +#define SDL_HINT_IME_INTERNAL_EDITING "SDL_IME_INTERNAL_EDITING" + + /** + * \brief A variable to control whether mouse and touch events are to be treated together or separately + * + * The variable can be set to the following values: + * "0" - Mouse events will be handled as touch events, and touch will raise fake mouse + * events. This is the behaviour of SDL <= 2.0.3. (default) + * "1" - Mouse events will be handled separately from pure touch events. + * + * The value of this hint is used at runtime, so it can be changed at any time. + */ +#define SDL_HINT_ANDROID_SEPARATE_MOUSE_AND_TOUCH "SDL_ANDROID_SEPARATE_MOUSE_AND_TOUCH" + + /** + * \brief A variable to control whether the return key on the soft keyboard + * should hide the soft keyboard on Android and iOS. + * + * The variable can be set to the following values: + * "0" - The return key will be handled as a key event. This is the behaviour of SDL <= 2.0.3. (default) + * "1" - The return key will hide the keyboard. + * + * The value of this hint is used at runtime, so it can be changed at any time. + */ +#define SDL_HINT_RETURN_KEY_HIDES_IME "SDL_RETURN_KEY_HIDES_IME" + +/** + * \brief override the binding element for keyboard inputs for Emscripten builds + * + * This hint only applies to the emscripten platform + * + * The variable can be one of + * "#window" - The javascript window object (this is the default) + * "#document" - The javascript document object + * "#screen" - the javascript window.screen object + * "#canvas" - the WebGL canvas element + * any other string without a leading # sign applies to the element on the page with that ID. + */ +#define SDL_HINT_EMSCRIPTEN_KEYBOARD_ELEMENT "SDL_EMSCRIPTEN_KEYBOARD_ELEMENT" + +/** + * \brief Tell SDL not to catch the SIGINT or SIGTERM signals. + * + * This hint only applies to Unix-like platforms. + * + * The variable can be set to the following values: + * "0" - SDL will install a SIGINT and SIGTERM handler, and when it + * catches a signal, convert it into an SDL_QUIT event. + * "1" - SDL will not install a signal handler at all. + */ +#define SDL_HINT_NO_SIGNAL_HANDLERS "SDL_NO_SIGNAL_HANDLERS" + +/** + * \brief Tell SDL not to generate window-close events for Alt+F4 on Windows. + * + * The variable can be set to the following values: + * "0" - SDL will generate a window-close event when it sees Alt+F4. + * "1" - SDL will only do normal key handling for Alt+F4. + */ +#define SDL_HINT_WINDOWS_NO_CLOSE_ON_ALT_F4 "SDL_WINDOWS_NO_CLOSE_ON_ALT_F4" + +/** + * \brief Prevent SDL from using version 4 of the bitmap header when saving BMPs. + * + * The bitmap header version 4 is required for proper alpha channel support and + * SDL will use it when required. Should this not be desired, this hint can + * force the use of the 40 byte header version which is supported everywhere. + * + * The variable can be set to the following values: + * "0" - Surfaces with a colorkey or an alpha channel are saved to a + * 32-bit BMP file with an alpha mask. SDL will use the bitmap + * header version 4 and set the alpha mask accordingly. + * "1" - Surfaces with a colorkey or an alpha channel are saved to a + * 32-bit BMP file without an alpha mask. The alpha channel data + * will be in the file, but applications are going to ignore it. + * + * The default value is "0". + */ +#define SDL_HINT_BMP_SAVE_LEGACY_FORMAT "SDL_BMP_SAVE_LEGACY_FORMAT" + +/** + * \brief Tell SDL not to name threads on Windows with the 0x406D1388 Exception. + * The 0x406D1388 Exception is a trick used to inform Visual Studio of a + * thread's name, but it tends to cause problems with other debuggers, + * and the .NET runtime. Note that SDL 2.0.6 and later will still use + * the (safer) SetThreadDescription API, introduced in the Windows 10 + * Creators Update, if available. + * + * The variable can be set to the following values: + * "0" - SDL will raise the 0x406D1388 Exception to name threads. + * This is the default behavior of SDL <= 2.0.4. + * "1" - SDL will not raise this exception, and threads will be unnamed. (default) + * This is necessary with .NET languages or debuggers that aren't Visual Studio. + */ +#define SDL_HINT_WINDOWS_DISABLE_THREAD_NAMING "SDL_WINDOWS_DISABLE_THREAD_NAMING" + +/** + * \brief Tell SDL which Dispmanx layer to use on a Raspberry PI + * + * Also known as Z-order. The variable can take a negative or positive value. + * The default is 10000. + */ +#define SDL_HINT_RPI_VIDEO_LAYER "SDL_RPI_VIDEO_LAYER" + +/** + * \brief Tell the video driver that we only want a double buffer. + * + * By default, most lowlevel 2D APIs will use a triple buffer scheme that + * wastes no CPU time on waiting for vsync after issuing a flip, but + * introduces a frame of latency. On the other hand, using a double buffer + * scheme instead is recommended for cases where low latency is an important + * factor because we save a whole frame of latency. + * We do so by waiting for vsync immediately after issuing a flip, usually just + * after eglSwapBuffers call in the backend's *_SwapWindow function. + * + * Since it's driver-specific, it's only supported where possible and + * implemented. Currently supported the following drivers: + * - KMSDRM (kmsdrm) + * - Raspberry Pi (raspberrypi) + */ +#define SDL_HINT_VIDEO_DOUBLE_BUFFER "SDL_VIDEO_DOUBLE_BUFFER" + +/** + * \brief A variable controlling what driver to use for OpenGL ES contexts. + * + * On some platforms, currently Windows and X11, OpenGL drivers may support + * creating contexts with an OpenGL ES profile. By default SDL uses these + * profiles, when available, otherwise it attempts to load an OpenGL ES + * library, e.g. that provided by the ANGLE project. This variable controls + * whether SDL follows this default behaviour or will always load an + * OpenGL ES library. + * + * Circumstances where this is useful include + * - Testing an app with a particular OpenGL ES implementation, e.g ANGLE, + * or emulator, e.g. those from ARM, Imagination or Qualcomm. + * - Resolving OpenGL ES function addresses at link time by linking with + * the OpenGL ES library instead of querying them at run time with + * SDL_GL_GetProcAddress(). + * + * Caution: for an application to work with the default behaviour across + * different OpenGL drivers it must query the OpenGL ES function + * addresses at run time using SDL_GL_GetProcAddress(). + * + * This variable is ignored on most platforms because OpenGL ES is native + * or not supported. + * + * This variable can be set to the following values: + * "0" - Use ES profile of OpenGL, if available. (Default when not set.) + * "1" - Load OpenGL ES library using the default library names. + * + */ +#define SDL_HINT_OPENGL_ES_DRIVER "SDL_OPENGL_ES_DRIVER" + +/** + * \brief A variable controlling speed/quality tradeoff of audio resampling. + * + * If available, SDL can use libsamplerate ( http://www.mega-nerd.com/SRC/ ) + * to handle audio resampling. There are different resampling modes available + * that produce different levels of quality, using more CPU. + * + * If this hint isn't specified to a valid setting, or libsamplerate isn't + * available, SDL will use the default, internal resampling algorithm. + * + * Note that this is currently only applicable to resampling audio that is + * being written to a device for playback or audio being read from a device + * for capture. SDL_AudioCVT always uses the default resampler (although this + * might change for SDL 2.1). + * + * This hint is currently only checked at audio subsystem initialization. + * + * This variable can be set to the following values: + * + * "0" or "default" - Use SDL's internal resampling (Default when not set - low quality, fast) + * "1" or "fast" - Use fast, slightly higher quality resampling, if available + * "2" or "medium" - Use medium quality resampling, if available + * "3" or "best" - Use high quality resampling, if available + */ +#define SDL_HINT_AUDIO_RESAMPLING_MODE "SDL_AUDIO_RESAMPLING_MODE" + +/** + * \brief A variable controlling the audio category on iOS and Mac OS X + * + * This variable can be set to the following values: + * + * "ambient" - Use the AVAudioSessionCategoryAmbient audio category, will be muted by the phone mute switch (default) + * "playback" - Use the AVAudioSessionCategoryPlayback category + * + * For more information, see Apple's documentation: + * https://developer.apple.com/library/content/documentation/Audio/Conceptual/AudioSessionProgrammingGuide/AudioSessionCategoriesandModes/AudioSessionCategoriesandModes.html + */ +#define SDL_HINT_AUDIO_CATEGORY "SDL_AUDIO_CATEGORY" + +/** + * \brief An enumeration of hint priorities + */ +typedef enum +{ + SDL_HINT_DEFAULT, + SDL_HINT_NORMAL, + SDL_HINT_OVERRIDE +} SDL_HintPriority; + + +/** + * \brief Set a hint with a specific priority + * + * The priority controls the behavior when setting a hint that already + * has a value. Hints will replace existing hints of their priority and + * lower. Environment variables are considered to have override priority. + * + * \return SDL_TRUE if the hint was set, SDL_FALSE otherwise + */ +extern DECLSPEC SDL_bool SDLCALL SDL_SetHintWithPriority(const char *name, + const char *value, + SDL_HintPriority priority); + +/** + * \brief Set a hint with normal priority + * + * \return SDL_TRUE if the hint was set, SDL_FALSE otherwise + */ +extern DECLSPEC SDL_bool SDLCALL SDL_SetHint(const char *name, + const char *value); + +/** + * \brief Get a hint + * + * \return The string value of a hint variable. + */ +extern DECLSPEC const char * SDLCALL SDL_GetHint(const char *name); + +/** + * \brief Get a hint + * + * \return The boolean value of a hint variable. + */ +extern DECLSPEC SDL_bool SDLCALL SDL_GetHintBoolean(const char *name, SDL_bool default_value); + +/** + * \brief type definition of the hint callback function. + */ +typedef void (SDLCALL *SDL_HintCallback)(void *userdata, const char *name, const char *oldValue, const char *newValue); + +/** + * \brief Add a function to watch a particular hint + * + * \param name The hint to watch + * \param callback The function to call when the hint value changes + * \param userdata A pointer to pass to the callback function + */ +extern DECLSPEC void SDLCALL SDL_AddHintCallback(const char *name, + SDL_HintCallback callback, + void *userdata); + +/** + * \brief Remove a function watching a particular hint + * + * \param name The hint being watched + * \param callback The function being called when the hint value changes + * \param userdata A pointer being passed to the callback function + */ +extern DECLSPEC void SDLCALL SDL_DelHintCallback(const char *name, + SDL_HintCallback callback, + void *userdata); + +/** + * \brief Clear all hints + * + * This function is called during SDL_Quit() to free stored hints. + */ +extern DECLSPEC void SDLCALL SDL_ClearHints(void); + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* SDL_hints_h_ */ + +/* vi: set ts=4 sw=4 expandtab: */