+++ /dev/null
-/* -*- Mode: C; indent-tabs-mode:t ; c-basic-offset:8 -*- */
-/*
- * Core functions for libusb
- * Copyright © 2012-2013 Nathan Hjelm <hjelmn@cs.unm.edu>
- * Copyright © 2007-2008 Daniel Drake <dsd@gentoo.org>
- * Copyright © 2001 Johannes Erdfelt <johannes@erdfelt.com>
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include "config.h"
-
-#include <errno.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#ifdef HAVE_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_TIME_H
-#include <sys/time.h>
-#endif
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#ifdef __ANDROID__
-#include <android/log.h>
-#endif
-
-#include "libusbi.h"
-#include "hotplug.h"
-
-struct libusb_context *usbi_default_context = NULL;
-static const struct libusb_version libusb_version_internal =
- { LIBUSB_MAJOR, LIBUSB_MINOR, LIBUSB_MICRO, LIBUSB_NANO,
- LIBUSB_RC, "http://libusb.info" };
-static int default_context_refcnt = 0;
-static usbi_mutex_static_t default_context_lock = USBI_MUTEX_INITIALIZER;
-static struct timespec timestamp_origin = { 0, 0 };
-
-usbi_mutex_static_t active_contexts_lock = USBI_MUTEX_INITIALIZER;
-struct list_head active_contexts_list;
-
-/**
- * \mainpage libusb-1.0 API Reference
- *
- * \section intro Introduction
- *
- * libusb is an open source library that allows you to communicate with USB
- * devices from userspace. For more info, see the
- * <a href="http://libusb.info">libusb homepage</a>.
- *
- * This documentation is aimed at application developers wishing to
- * communicate with USB peripherals from their own software. After reviewing
- * this documentation, feedback and questions can be sent to the
- * <a href="http://mailing-list.libusb.info">libusb-devel mailing list</a>.
- *
- * This documentation assumes knowledge of how to operate USB devices from
- * a software standpoint (descriptors, configurations, interfaces, endpoints,
- * control/bulk/interrupt/isochronous transfers, etc). Full information
- * can be found in the <a href="http://www.usb.org/developers/docs/">USB 3.0
- * Specification</a> which is available for free download. You can probably
- * find less verbose introductions by searching the web.
- *
- * \section API Application Programming Interface (API)
- *
- * See the \ref libusb_api page for a complete list of the libusb functions.
- *
- * \section features Library features
- *
- * - All transfer types supported (control/bulk/interrupt/isochronous)
- * - 2 transfer interfaces:
- * -# Synchronous (simple)
- * -# Asynchronous (more complicated, but more powerful)
- * - Thread safe (although the asynchronous interface means that you
- * usually won't need to thread)
- * - Lightweight with lean API
- * - Compatible with libusb-0.1 through the libusb-compat-0.1 translation layer
- * - Hotplug support (on some platforms). See \ref libusb_hotplug.
- *
- * \section gettingstarted Getting Started
- *
- * To begin reading the API documentation, start with the Modules page which
- * links to the different categories of libusb's functionality.
- *
- * One decision you will have to make is whether to use the synchronous
- * or the asynchronous data transfer interface. The \ref libusb_io documentation
- * provides some insight into this topic.
- *
- * Some example programs can be found in the libusb source distribution under
- * the "examples" subdirectory. The libusb homepage includes a list of
- * real-life project examples which use libusb.
- *
- * \section errorhandling Error handling
- *
- * libusb functions typically return 0 on success or a negative error code
- * on failure. These negative error codes relate to LIBUSB_ERROR constants
- * which are listed on the \ref libusb_misc "miscellaneous" documentation page.
- *
- * \section msglog Debug message logging
- *
- * libusb uses stderr for all logging. By default, logging is set to NONE,
- * which means that no output will be produced. However, unless the library
- * has been compiled with logging disabled, then any application calls to
- * libusb_set_option(ctx, LIBUSB_OPTION_LOG_LEVEL, level), or the setting of the
- * environmental variable LIBUSB_DEBUG outside of the application, can result
- * in logging being produced. Your application should therefore not close
- * stderr, but instead direct it to the null device if its output is
- * undesirable.
- *
- * The libusb_set_option(ctx, LIBUSB_OPTION_LOG_LEVEL, level) function can be
- * used to enable logging of certain messages. Under standard configuration,
- * libusb doesn't really log much so you are advised to use this function
- * to enable all error/warning/ informational messages. It will help debug
- * problems with your software.
- *
- * The logged messages are unstructured. There is no one-to-one correspondence
- * between messages being logged and success or failure return codes from
- * libusb functions. There is no format to the messages, so you should not
- * try to capture or parse them. They are not and will not be localized.
- * These messages are not intended to being passed to your application user;
- * instead, you should interpret the error codes returned from libusb functions
- * and provide appropriate notification to the user. The messages are simply
- * there to aid you as a programmer, and if you're confused because you're
- * getting a strange error code from a libusb function, enabling message
- * logging may give you a suitable explanation.
- *
- * The LIBUSB_DEBUG environment variable can be used to enable message logging
- * at run-time. This environment variable should be set to a log level number,
- * which is interpreted the same as the
- * libusb_set_option(ctx, LIBUSB_OPTION_LOG_LEVEL, level) parameter. When this
- * environment variable is set, the message logging verbosity level is fixed
- * and libusb_set_option(ctx, LIBUSB_OPTION_LOG_LEVEL, level) effectively does
- * nothing.
- *
- * libusb can be compiled without any logging functions, useful for embedded
- * systems. In this case, libusb_set_option(ctx, LIBUSB_OPTION_LOG_LEVEL, level)
- * and the LIBUSB_DEBUG environment variable have no effects.
- *
- * libusb can also be compiled with verbose debugging messages always. When
- * the library is compiled in this way, all messages of all verbosities are
- * always logged. libusb_set_option(ctx, LIBUSB_OPTION_LOG_LEVEL, level) and
- * the LIBUSB_DEBUG environment variable have no effects.
- *
- * \section remarks Other remarks
- *
- * libusb does have imperfections. The \ref libusb_caveats "caveats" page attempts
- * to document these.
- */
-
-/**
- * \page libusb_caveats Caveats
- *
- * \section fork Fork considerations
- *
- * libusb is <em>not</em> designed to work across fork() calls. Depending on
- * the platform, there may be resources in the parent process that are not
- * available to the child (e.g. the hotplug monitor thread on Linux). In
- * addition, since the parent and child will share libusb's internal file
- * descriptors, using libusb in any way from the child could cause the parent
- * process's \ref libusb_context to get into an inconsistent state.
- *
- * On Linux, libusb's file descriptors will be marked as CLOEXEC, which means
- * that it is safe to fork() and exec() without worrying about the child
- * process needing to clean up state or having access to these file descriptors.
- * Other platforms may not be so forgiving, so consider yourself warned!
- *
- * \section devresets Device resets
- *
- * The libusb_reset_device() function allows you to reset a device. If your
- * program has to call such a function, it should obviously be aware that
- * the reset will cause device state to change (e.g. register values may be
- * reset).
- *
- * The problem is that any other program could reset the device your program
- * is working with, at any time. libusb does not offer a mechanism to inform
- * you when this has happened, so if someone else resets your device it will
- * not be clear to your own program why the device state has changed.
- *
- * Ultimately, this is a limitation of writing drivers in userspace.
- * Separation from the USB stack in the underlying kernel makes it difficult
- * for the operating system to deliver such notifications to your program.
- * The Linux kernel USB stack allows such reset notifications to be delivered
- * to in-kernel USB drivers, but it is not clear how such notifications could
- * be delivered to second-class drivers that live in userspace.
- *
- * \section blockonly Blocking-only functionality
- *
- * The functionality listed below is only available through synchronous,
- * blocking functions. There are no asynchronous/non-blocking alternatives,
- * and no clear ways of implementing these.
- *
- * - Configuration activation (libusb_set_configuration())
- * - Interface/alternate setting activation (libusb_set_interface_alt_setting())
- * - Releasing of interfaces (libusb_release_interface())
- * - Clearing of halt/stall condition (libusb_clear_halt())
- * - Device resets (libusb_reset_device())
- *
- * \section configsel Configuration selection and handling
- *
- * When libusb presents a device handle to an application, there is a chance
- * that the corresponding device may be in unconfigured state. For devices
- * with multiple configurations, there is also a chance that the configuration
- * currently selected is not the one that the application wants to use.
- *
- * The obvious solution is to add a call to libusb_set_configuration() early
- * on during your device initialization routines, but there are caveats to
- * be aware of:
- * -# If the device is already in the desired configuration, calling
- * libusb_set_configuration() using the same configuration value will cause
- * a lightweight device reset. This may not be desirable behaviour.
- * -# In the case where the desired configuration is already active, libusb
- * may not even be able to perform a lightweight device reset. For example,
- * take my USB keyboard with fingerprint reader: I'm interested in driving
- * the fingerprint reader interface through libusb, but the kernel's
- * USB-HID driver will almost always have claimed the keyboard interface.
- * Because the kernel has claimed an interface, it is not even possible to
- * perform the lightweight device reset, so libusb_set_configuration() will
- * fail. (Luckily the device in question only has a single configuration.)
- * -# libusb will be unable to set a configuration if other programs or
- * drivers have claimed interfaces. In particular, this means that kernel
- * drivers must be detached from all the interfaces before
- * libusb_set_configuration() may succeed.
- *
- * One solution to some of the above problems is to consider the currently
- * active configuration. If the configuration we want is already active, then
- * we don't have to select any configuration:
-\code
-cfg = -1;
-libusb_get_configuration(dev, &cfg);
-if (cfg != desired)
- libusb_set_configuration(dev, desired);
-\endcode
- *
- * This is probably suitable for most scenarios, but is inherently racy:
- * another application or driver may change the selected configuration
- * <em>after</em> the libusb_get_configuration() call.
- *
- * Even in cases where libusb_set_configuration() succeeds, consider that other
- * applications or drivers may change configuration after your application
- * calls libusb_set_configuration().
- *
- * One possible way to lock your device into a specific configuration is as
- * follows:
- * -# Set the desired configuration (or use the logic above to realise that
- * it is already in the desired configuration)
- * -# Claim the interface that you wish to use
- * -# Check that the currently active configuration is the one that you want
- * to use.
- *
- * The above method works because once an interface is claimed, no application
- * or driver is able to select another configuration.
- *
- * \section earlycomp Early transfer completion
- *
- * NOTE: This section is currently Linux-centric. I am not sure if any of these
- * considerations apply to Darwin or other platforms.
- *
- * When a transfer completes early (i.e. when less data is received/sent in
- * any one packet than the transfer buffer allows for) then libusb is designed
- * to terminate the transfer immediately, not transferring or receiving any
- * more data unless other transfers have been queued by the user.
- *
- * On legacy platforms, libusb is unable to do this in all situations. After
- * the incomplete packet occurs, "surplus" data may be transferred. For recent
- * versions of libusb, this information is kept (the data length of the
- * transfer is updated) and, for device-to-host transfers, any surplus data was
- * added to the buffer. Still, this is not a nice solution because it loses the
- * information about the end of the short packet, and the user probably wanted
- * that surplus data to arrive in the next logical transfer.
- *
- * \section zlp Zero length packets
- *
- * - libusb is able to send a packet of zero length to an endpoint simply by
- * submitting a transfer of zero length.
- * - The \ref libusb_transfer_flags::LIBUSB_TRANSFER_ADD_ZERO_PACKET
- * "LIBUSB_TRANSFER_ADD_ZERO_PACKET" flag is currently only supported on Linux.
- */
-
-/**
- * \page libusb_contexts Contexts
- *
- * It is possible that libusb may be used simultaneously from two independent
- * libraries linked into the same executable. For example, if your application
- * has a plugin-like system which allows the user to dynamically load a range
- * of modules into your program, it is feasible that two independently
- * developed modules may both use libusb.
- *
- * libusb is written to allow for these multiple user scenarios. The two
- * "instances" of libusb will not interfere: libusb_set_option() calls
- * from one user will not affect the same settings for other users, other
- * users can continue using libusb after one of them calls libusb_exit(), etc.
- *
- * This is made possible through libusb's <em>context</em> concept. When you
- * call libusb_init(), you are (optionally) given a context. You can then pass
- * this context pointer back into future libusb functions.
- *
- * In order to keep things simple for more simplistic applications, it is
- * legal to pass NULL to all functions requiring a context pointer (as long as
- * you're sure no other code will attempt to use libusb from the same process).
- * When you pass NULL, the default context will be used. The default context
- * is created the first time a process calls libusb_init() when no other
- * context is alive. Contexts are destroyed during libusb_exit().
- *
- * The default context is reference-counted and can be shared. That means that
- * if libusb_init(NULL) is called twice within the same process, the two
- * users end up sharing the same context. The deinitialization and freeing of
- * the default context will only happen when the last user calls libusb_exit().
- * In other words, the default context is created and initialized when its
- * reference count goes from 0 to 1, and is deinitialized and destroyed when
- * its reference count goes from 1 to 0.
- *
- * You may be wondering why only a subset of libusb functions require a
- * context pointer in their function definition. Internally, libusb stores
- * context pointers in other objects (e.g. libusb_device instances) and hence
- * can infer the context from those objects.
- */
-
- /**
- * \page libusb_api Application Programming Interface
- *
- * This is the complete list of libusb functions, structures and
- * enumerations in alphabetical order.
- *
- * \section Functions
- * - libusb_alloc_streams()
- * - libusb_alloc_transfer()
- * - libusb_attach_kernel_driver()
- * - libusb_bulk_transfer()
- * - libusb_cancel_transfer()
- * - libusb_claim_interface()
- * - libusb_clear_halt()
- * - libusb_close()
- * - libusb_control_transfer()
- * - libusb_control_transfer_get_data()
- * - libusb_control_transfer_get_setup()
- * - libusb_cpu_to_le16()
- * - libusb_detach_kernel_driver()
- * - libusb_dev_mem_alloc()
- * - libusb_dev_mem_free()
- * - libusb_error_name()
- * - libusb_event_handler_active()
- * - libusb_event_handling_ok()
- * - libusb_exit()
- * - libusb_fill_bulk_stream_transfer()
- * - libusb_fill_bulk_transfer()
- * - libusb_fill_control_setup()
- * - libusb_fill_control_transfer()
- * - libusb_fill_interrupt_transfer()
- * - libusb_fill_iso_transfer()
- * - libusb_free_bos_descriptor()
- * - libusb_free_config_descriptor()
- * - libusb_free_container_id_descriptor()
- * - libusb_free_device_list()
- * - libusb_free_pollfds()
- * - libusb_free_ss_endpoint_companion_descriptor()
- * - libusb_free_ss_usb_device_capability_descriptor()
- * - libusb_free_streams()
- * - libusb_free_transfer()
- * - libusb_free_usb_2_0_extension_descriptor()
- * - libusb_get_active_config_descriptor()
- * - libusb_get_bos_descriptor()
- * - libusb_get_bus_number()
- * - libusb_get_config_descriptor()
- * - libusb_get_config_descriptor_by_value()
- * - libusb_get_configuration()
- * - libusb_get_container_id_descriptor()
- * - libusb_get_descriptor()
- * - libusb_get_device()
- * - libusb_get_device_address()
- * - libusb_get_device_descriptor()
- * - libusb_get_device_list()
- * - libusb_get_device_speed()
- * - libusb_get_iso_packet_buffer()
- * - libusb_get_iso_packet_buffer_simple()
- * - libusb_get_max_iso_packet_size()
- * - libusb_get_max_packet_size()
- * - libusb_get_next_timeout()
- * - libusb_get_parent()
- * - libusb_get_pollfds()
- * - libusb_get_port_number()
- * - libusb_get_port_numbers()
- * - libusb_get_port_path()
- * - libusb_get_ss_endpoint_companion_descriptor()
- * - libusb_get_ss_usb_device_capability_descriptor()
- * - libusb_get_string_descriptor()
- * - libusb_get_string_descriptor_ascii()
- * - libusb_get_usb_2_0_extension_descriptor()
- * - libusb_get_version()
- * - libusb_handle_events()
- * - libusb_handle_events_completed()
- * - libusb_handle_events_locked()
- * - libusb_handle_events_timeout()
- * - libusb_handle_events_timeout_completed()
- * - libusb_has_capability()
- * - libusb_hotplug_deregister_callback()
- * - libusb_hotplug_register_callback()
- * - libusb_init()
- * - libusb_interrupt_event_handler()
- * - libusb_interrupt_transfer()
- * - libusb_kernel_driver_active()
- * - libusb_lock_events()
- * - libusb_lock_event_waiters()
- * - libusb_open()
- * - libusb_open_device_with_vid_pid()
- * - libusb_pollfds_handle_timeouts()
- * - libusb_ref_device()
- * - libusb_release_interface()
- * - libusb_reset_device()
- * - libusb_set_auto_detach_kernel_driver()
- * - libusb_set_configuration()
- * - libusb_set_debug()
- * - libusb_set_interface_alt_setting()
- * - libusb_set_iso_packet_lengths()
- * - libusb_set_option()
- * - libusb_setlocale()
- * - libusb_set_pollfd_notifiers()
- * - libusb_strerror()
- * - libusb_submit_transfer()
- * - libusb_transfer_get_stream_id()
- * - libusb_transfer_set_stream_id()
- * - libusb_try_lock_events()
- * - libusb_unlock_events()
- * - libusb_unlock_event_waiters()
- * - libusb_unref_device()
- * - libusb_wait_for_event()
- *
- * \section Structures
- * - libusb_bos_descriptor
- * - libusb_bos_dev_capability_descriptor
- * - libusb_config_descriptor
- * - libusb_container_id_descriptor
- * - \ref libusb_context
- * - libusb_control_setup
- * - \ref libusb_device
- * - libusb_device_descriptor
- * - \ref libusb_device_handle
- * - libusb_endpoint_descriptor
- * - libusb_interface
- * - libusb_interface_descriptor
- * - libusb_iso_packet_descriptor
- * - libusb_pollfd
- * - libusb_ss_endpoint_companion_descriptor
- * - libusb_ss_usb_device_capability_descriptor
- * - libusb_transfer
- * - libusb_usb_2_0_extension_descriptor
- * - libusb_version
- *
- * \section Enums
- * - \ref libusb_bos_type
- * - \ref libusb_capability
- * - \ref libusb_class_code
- * - \ref libusb_descriptor_type
- * - \ref libusb_endpoint_direction
- * - \ref libusb_error
- * - \ref libusb_iso_sync_type
- * - \ref libusb_iso_usage_type
- * - \ref libusb_log_level
- * - \ref libusb_option
- * - \ref libusb_request_recipient
- * - \ref libusb_request_type
- * - \ref libusb_speed
- * - \ref libusb_ss_usb_device_capability_attributes
- * - \ref libusb_standard_request
- * - \ref libusb_supported_speed
- * - \ref libusb_transfer_flags
- * - \ref libusb_transfer_status
- * - \ref libusb_transfer_type
- * - \ref libusb_usb_2_0_extension_attributes
- */
-
-/**
- * @defgroup libusb_lib Library initialization/deinitialization
- * This page details how to initialize and deinitialize libusb. Initialization
- * must be performed before using any libusb functionality, and similarly you
- * must not call any libusb functions after deinitialization.
- */
-
-/**
- * @defgroup libusb_dev Device handling and enumeration
- * The functionality documented below is designed to help with the following
- * operations:
- * - Enumerating the USB devices currently attached to the system
- * - Choosing a device to operate from your software
- * - Opening and closing the chosen device
- *
- * \section nutshell In a nutshell...
- *
- * The description below really makes things sound more complicated than they
- * actually are. The following sequence of function calls will be suitable
- * for almost all scenarios and does not require you to have such a deep
- * understanding of the resource management issues:
- * \code
-// discover devices
-libusb_device **list;
-libusb_device *found = NULL;
-ssize_t cnt = libusb_get_device_list(NULL, &list);
-ssize_t i = 0;
-int err = 0;
-if (cnt < 0)
- error();
-
-for (i = 0; i < cnt; i++) {
- libusb_device *device = list[i];
- if (is_interesting(device)) {
- found = device;
- break;
- }
-}
-
-if (found) {
- libusb_device_handle *handle;
-
- err = libusb_open(found, &handle);
- if (err)
- error();
- // etc
-}
-
-libusb_free_device_list(list, 1);
-\endcode
- *
- * The two important points:
- * - You asked libusb_free_device_list() to unreference the devices (2nd
- * parameter)
- * - You opened the device before freeing the list and unreferencing the
- * devices
- *
- * If you ended up with a handle, you can now proceed to perform I/O on the
- * device.
- *
- * \section devshandles Devices and device handles
- * libusb has a concept of a USB device, represented by the
- * \ref libusb_device opaque type. A device represents a USB device that
- * is currently or was previously connected to the system. Using a reference
- * to a device, you can determine certain information about the device (e.g.
- * you can read the descriptor data).
- *
- * The libusb_get_device_list() function can be used to obtain a list of
- * devices currently connected to the system. This is known as device
- * discovery.
- *
- * Just because you have a reference to a device does not mean it is
- * necessarily usable. The device may have been unplugged, you may not have
- * permission to operate such device, or another program or driver may be
- * using the device.
- *
- * When you've found a device that you'd like to operate, you must ask
- * libusb to open the device using the libusb_open() function. Assuming
- * success, libusb then returns you a <em>device handle</em>
- * (a \ref libusb_device_handle pointer). All "real" I/O operations then
- * operate on the handle rather than the original device pointer.
- *
- * \section devref Device discovery and reference counting
- *
- * Device discovery (i.e. calling libusb_get_device_list()) returns a
- * freshly-allocated list of devices. The list itself must be freed when
- * you are done with it. libusb also needs to know when it is OK to free
- * the contents of the list - the devices themselves.
- *
- * To handle these issues, libusb provides you with two separate items:
- * - A function to free the list itself
- * - A reference counting system for the devices inside
- *
- * New devices presented by the libusb_get_device_list() function all have a
- * reference count of 1. You can increase and decrease reference count using
- * libusb_ref_device() and libusb_unref_device(). A device is destroyed when
- * its reference count reaches 0.
- *
- * With the above information in mind, the process of opening a device can
- * be viewed as follows:
- * -# Discover devices using libusb_get_device_list().
- * -# Choose the device that you want to operate, and call libusb_open().
- * -# Unref all devices in the discovered device list.
- * -# Free the discovered device list.
- *
- * The order is important - you must not unreference the device before
- * attempting to open it, because unreferencing it may destroy the device.
- *
- * For convenience, the libusb_free_device_list() function includes a
- * parameter to optionally unreference all the devices in the list before
- * freeing the list itself. This combines steps 3 and 4 above.
- *
- * As an implementation detail, libusb_open() actually adds a reference to
- * the device in question. This is because the device remains available
- * through the handle via libusb_get_device(). The reference is deleted during
- * libusb_close().
- */
-
-/** @defgroup libusb_misc Miscellaneous */
-
-/* we traverse usbfs without knowing how many devices we are going to find.
- * so we create this discovered_devs model which is similar to a linked-list
- * which grows when required. it can be freed once discovery has completed,
- * eliminating the need for a list node in the libusb_device structure
- * itself. */
-#define DISCOVERED_DEVICES_SIZE_STEP 8
-
-static struct discovered_devs *discovered_devs_alloc(void)
-{
- struct discovered_devs *ret =
- malloc(sizeof(*ret) + (sizeof(void *) * DISCOVERED_DEVICES_SIZE_STEP));
-
- if (ret) {
- ret->len = 0;
- ret->capacity = DISCOVERED_DEVICES_SIZE_STEP;
- }
- return ret;
-}
-
-static void discovered_devs_free(struct discovered_devs *discdevs)
-{
- size_t i;
-
- for (i = 0; i < discdevs->len; i++)
- libusb_unref_device(discdevs->devices[i]);
-
- free(discdevs);
-}
-
-/* append a device to the discovered devices collection. may realloc itself,
- * returning new discdevs. returns NULL on realloc failure. */
-struct discovered_devs *discovered_devs_append(
- struct discovered_devs *discdevs, struct libusb_device *dev)
-{
- size_t len = discdevs->len;
- size_t capacity;
- struct discovered_devs *new_discdevs;
-
- /* if there is space, just append the device */
- if (len < discdevs->capacity) {
- discdevs->devices[len] = libusb_ref_device(dev);
- discdevs->len++;
- return discdevs;
- }
-
- /* exceeded capacity, need to grow */
- usbi_dbg("need to increase capacity");
- capacity = discdevs->capacity + DISCOVERED_DEVICES_SIZE_STEP;
- /* can't use usbi_reallocf here because in failure cases it would
- * free the existing discdevs without unreferencing its devices. */
- new_discdevs = realloc(discdevs,
- sizeof(*discdevs) + (sizeof(void *) * capacity));
- if (!new_discdevs) {
- discovered_devs_free(discdevs);
- return NULL;
- }
-
- discdevs = new_discdevs;
- discdevs->capacity = capacity;
- discdevs->devices[len] = libusb_ref_device(dev);
- discdevs->len++;
-
- return discdevs;
-}
-
-/* Allocate a new device with a specific session ID. The returned device has
- * a reference count of 1. */
-struct libusb_device *usbi_alloc_device(struct libusb_context *ctx,
- unsigned long session_id)
-{
- size_t priv_size = usbi_backend.device_priv_size;
- struct libusb_device *dev = calloc(1, sizeof(*dev) + priv_size);
- int r;
-
- if (!dev)
- return NULL;
-
- r = usbi_mutex_init(&dev->lock);
- if (r) {
- free(dev);
- return NULL;
- }
-
- dev->ctx = ctx;
- dev->refcnt = 1;
- dev->session_data = session_id;
- dev->speed = LIBUSB_SPEED_UNKNOWN;
-
- if (!libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG)) {
- usbi_connect_device (dev);
- }
-
- return dev;
-}
-
-void usbi_connect_device(struct libusb_device *dev)
-{
- struct libusb_context *ctx = DEVICE_CTX(dev);
-
- dev->attached = 1;
-
- usbi_mutex_lock(&dev->ctx->usb_devs_lock);
- list_add(&dev->list, &dev->ctx->usb_devs);
- usbi_mutex_unlock(&dev->ctx->usb_devs_lock);
-
- /* Signal that an event has occurred for this device if we support hotplug AND
- * the hotplug message list is ready. This prevents an event from getting raised
- * during initial enumeration. */
- if (libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG) && dev->ctx->hotplug_msgs.next) {
- usbi_hotplug_notification(ctx, dev, LIBUSB_HOTPLUG_EVENT_DEVICE_ARRIVED);
- }
-}
-
-void usbi_disconnect_device(struct libusb_device *dev)
-{
- struct libusb_context *ctx = DEVICE_CTX(dev);
-
- usbi_mutex_lock(&dev->lock);
- dev->attached = 0;
- usbi_mutex_unlock(&dev->lock);
-
- usbi_mutex_lock(&ctx->usb_devs_lock);
- list_del(&dev->list);
- usbi_mutex_unlock(&ctx->usb_devs_lock);
-
- /* Signal that an event has occurred for this device if we support hotplug AND
- * the hotplug message list is ready. This prevents an event from getting raised
- * during initial enumeration. libusb_handle_events will take care of dereferencing
- * the device. */
- if (libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG) && dev->ctx->hotplug_msgs.next) {
- usbi_hotplug_notification(ctx, dev, LIBUSB_HOTPLUG_EVENT_DEVICE_LEFT);
- }
-}
-
-/* Perform some final sanity checks on a newly discovered device. If this
- * function fails (negative return code), the device should not be added
- * to the discovered device list. */
-int usbi_sanitize_device(struct libusb_device *dev)
-{
- int r;
- uint8_t num_configurations;
-
- r = usbi_device_cache_descriptor(dev);
- if (r < 0)
- return r;
-
- num_configurations = dev->device_descriptor.bNumConfigurations;
- if (num_configurations > USB_MAXCONFIG) {
- usbi_err(DEVICE_CTX(dev), "too many configurations");
- return LIBUSB_ERROR_IO;
- } else if (0 == num_configurations)
- usbi_dbg("zero configurations, maybe an unauthorized device");
-
- dev->num_configurations = num_configurations;
- return 0;
-}
-
-/* Examine libusb's internal list of known devices, looking for one with
- * a specific session ID. Returns the matching device if it was found, and
- * NULL otherwise. */
-struct libusb_device *usbi_get_device_by_session_id(struct libusb_context *ctx,
- unsigned long session_id)
-{
- struct libusb_device *dev;
- struct libusb_device *ret = NULL;
-
- usbi_mutex_lock(&ctx->usb_devs_lock);
- list_for_each_entry(dev, &ctx->usb_devs, list, struct libusb_device)
- if (dev->session_data == session_id) {
- ret = libusb_ref_device(dev);
- break;
- }
- usbi_mutex_unlock(&ctx->usb_devs_lock);
-
- return ret;
-}
-
-/** @ingroup libusb_dev
- * Returns a list of USB devices currently attached to the system. This is
- * your entry point into finding a USB device to operate.
- *
- * You are expected to unreference all the devices when you are done with
- * them, and then free the list with libusb_free_device_list(). Note that
- * libusb_free_device_list() can unref all the devices for you. Be careful
- * not to unreference a device you are about to open until after you have
- * opened it.
- *
- * This return value of this function indicates the number of devices in
- * the resultant list. The list is actually one element larger, as it is
- * NULL-terminated.
- *
- * \param ctx the context to operate on, or NULL for the default context
- * \param list output location for a list of devices. Must be later freed with
- * libusb_free_device_list().
- * \returns the number of devices in the outputted list, or any
- * \ref libusb_error according to errors encountered by the backend.
- */
-ssize_t API_EXPORTED libusb_get_device_list(libusb_context *ctx,
- libusb_device ***list)
-{
- struct discovered_devs *discdevs = discovered_devs_alloc();
- struct libusb_device **ret;
- int r = 0;
- ssize_t i, len;
- USBI_GET_CONTEXT(ctx);
- usbi_dbg("");
-
- if (!discdevs)
- return LIBUSB_ERROR_NO_MEM;
-
- if (libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG)) {
- /* backend provides hotplug support */
- struct libusb_device *dev;
-
- if (usbi_backend.hotplug_poll)
- usbi_backend.hotplug_poll();
-
- usbi_mutex_lock(&ctx->usb_devs_lock);
- list_for_each_entry(dev, &ctx->usb_devs, list, struct libusb_device) {
- discdevs = discovered_devs_append(discdevs, dev);
-
- if (!discdevs) {
- r = LIBUSB_ERROR_NO_MEM;
- break;
- }
- }
- usbi_mutex_unlock(&ctx->usb_devs_lock);
- } else {
- /* backend does not provide hotplug support */
- r = usbi_backend.get_device_list(ctx, &discdevs);
- }
-
- if (r < 0) {
- len = r;
- goto out;
- }
-
- /* convert discovered_devs into a list */
- len = discdevs->len;
- ret = calloc(len + 1, sizeof(struct libusb_device *));
- if (!ret) {
- len = LIBUSB_ERROR_NO_MEM;
- goto out;
- }
-
- ret[len] = NULL;
- for (i = 0; i < len; i++) {
- struct libusb_device *dev = discdevs->devices[i];
- ret[i] = libusb_ref_device(dev);
- }
- *list = ret;
-
-out:
- if (discdevs)
- discovered_devs_free(discdevs);
- return len;
-}
-
-/** \ingroup libusb_dev
- * Frees a list of devices previously discovered using
- * libusb_get_device_list(). If the unref_devices parameter is set, the
- * reference count of each device in the list is decremented by 1.
- * \param list the list to free
- * \param unref_devices whether to unref the devices in the list
- */
-void API_EXPORTED libusb_free_device_list(libusb_device **list,
- int unref_devices)
-{
- if (!list)
- return;
-
- if (unref_devices) {
- int i = 0;
- struct libusb_device *dev;
-
- while ((dev = list[i++]) != NULL)
- libusb_unref_device(dev);
- }
- free(list);
-}
-
-/** \ingroup libusb_dev
- * Get the number of the bus that a device is connected to.
- * \param dev a device
- * \returns the bus number
- */
-uint8_t API_EXPORTED libusb_get_bus_number(libusb_device *dev)
-{
- return dev->bus_number;
-}
-
-/** \ingroup libusb_dev
- * Get the number of the port that a device is connected to.
- * Unless the OS does something funky, or you are hot-plugging USB extension cards,
- * the port number returned by this call is usually guaranteed to be uniquely tied
- * to a physical port, meaning that different devices plugged on the same physical
- * port should return the same port number.
- *
- * But outside of this, there is no guarantee that the port number returned by this
- * call will remain the same, or even match the order in which ports have been
- * numbered by the HUB/HCD manufacturer.
- *
- * \param dev a device
- * \returns the port number (0 if not available)
- */
-uint8_t API_EXPORTED libusb_get_port_number(libusb_device *dev)
-{
- return dev->port_number;
-}
-
-/** \ingroup libusb_dev
- * Get the list of all port numbers from root for the specified device
- *
- * Since version 1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102
- * \param dev a device
- * \param port_numbers the array that should contain the port numbers
- * \param port_numbers_len the maximum length of the array. As per the USB 3.0
- * specs, the current maximum limit for the depth is 7.
- * \returns the number of elements filled
- * \returns LIBUSB_ERROR_OVERFLOW if the array is too small
- */
-int API_EXPORTED libusb_get_port_numbers(libusb_device *dev,
- uint8_t* port_numbers, int port_numbers_len)
-{
- int i = port_numbers_len;
- struct libusb_context *ctx = DEVICE_CTX(dev);
-
- if (port_numbers_len <= 0)
- return LIBUSB_ERROR_INVALID_PARAM;
-
- // HCDs can be listed as devices with port #0
- while((dev) && (dev->port_number != 0)) {
- if (--i < 0) {
- usbi_warn(ctx, "port numbers array is too small");
- return LIBUSB_ERROR_OVERFLOW;
- }
- port_numbers[i] = dev->port_number;
- dev = dev->parent_dev;
- }
- if (i < port_numbers_len)
- memmove(port_numbers, &port_numbers[i], port_numbers_len - i);
- return port_numbers_len - i;
-}
-
-/** \ingroup libusb_dev
- * Deprecated please use libusb_get_port_numbers instead.
- */
-int API_EXPORTED libusb_get_port_path(libusb_context *ctx, libusb_device *dev,
- uint8_t* port_numbers, uint8_t port_numbers_len)
-{
- UNUSED(ctx);
-
- return libusb_get_port_numbers(dev, port_numbers, port_numbers_len);
-}
-
-/** \ingroup libusb_dev
- * Get the the parent from the specified device.
- * \param dev a device
- * \returns the device parent or NULL if not available
- * You should issue a \ref libusb_get_device_list() before calling this
- * function and make sure that you only access the parent before issuing
- * \ref libusb_free_device_list(). The reason is that libusb currently does
- * not maintain a permanent list of device instances, and therefore can
- * only guarantee that parents are fully instantiated within a
- * libusb_get_device_list() - libusb_free_device_list() block.
- */
-DEFAULT_VISIBILITY
-libusb_device * LIBUSB_CALL libusb_get_parent(libusb_device *dev)
-{
- return dev->parent_dev;
-}
-
-/** \ingroup libusb_dev
- * Get the address of the device on the bus it is connected to.
- * \param dev a device
- * \returns the device address
- */
-uint8_t API_EXPORTED libusb_get_device_address(libusb_device *dev)
-{
- return dev->device_address;
-}
-
-/** \ingroup libusb_dev
- * Get the negotiated connection speed for a device.
- * \param dev a device
- * \returns a \ref libusb_speed code, where LIBUSB_SPEED_UNKNOWN means that
- * the OS doesn't know or doesn't support returning the negotiated speed.
- */
-int API_EXPORTED libusb_get_device_speed(libusb_device *dev)
-{
- return dev->speed;
-}
-
-static const struct libusb_endpoint_descriptor *find_endpoint(
- struct libusb_config_descriptor *config, unsigned char endpoint)
-{
- int iface_idx;
- for (iface_idx = 0; iface_idx < config->bNumInterfaces; iface_idx++) {
- const struct libusb_interface *iface = &config->interface[iface_idx];
- int altsetting_idx;
-
- for (altsetting_idx = 0; altsetting_idx < iface->num_altsetting;
- altsetting_idx++) {
- const struct libusb_interface_descriptor *altsetting
- = &iface->altsetting[altsetting_idx];
- int ep_idx;
-
- for (ep_idx = 0; ep_idx < altsetting->bNumEndpoints; ep_idx++) {
- const struct libusb_endpoint_descriptor *ep =
- &altsetting->endpoint[ep_idx];
- if (ep->bEndpointAddress == endpoint)
- return ep;
- }
- }
- }
- return NULL;
-}
-
-/** \ingroup libusb_dev
- * Convenience function to retrieve the wMaxPacketSize value for a particular
- * endpoint in the active device configuration.
- *
- * This function was originally intended to be of assistance when setting up
- * isochronous transfers, but a design mistake resulted in this function
- * instead. It simply returns the wMaxPacketSize value without considering
- * its contents. If you're dealing with isochronous transfers, you probably
- * want libusb_get_max_iso_packet_size() instead.
- *
- * \param dev a device
- * \param endpoint address of the endpoint in question
- * \returns the wMaxPacketSize value
- * \returns LIBUSB_ERROR_NOT_FOUND if the endpoint does not exist
- * \returns LIBUSB_ERROR_OTHER on other failure
- */
-int API_EXPORTED libusb_get_max_packet_size(libusb_device *dev,
- unsigned char endpoint)
-{
- struct libusb_config_descriptor *config;
- const struct libusb_endpoint_descriptor *ep;
- int r;
-
- r = libusb_get_active_config_descriptor(dev, &config);
- if (r < 0) {
- usbi_err(DEVICE_CTX(dev),
- "could not retrieve active config descriptor");
- return LIBUSB_ERROR_OTHER;
- }
-
- ep = find_endpoint(config, endpoint);
- if (!ep) {
- r = LIBUSB_ERROR_NOT_FOUND;
- goto out;
- }
-
- r = ep->wMaxPacketSize;
-
-out:
- libusb_free_config_descriptor(config);
- return r;
-}
-
-/** \ingroup libusb_dev
- * Calculate the maximum packet size which a specific endpoint is capable is
- * sending or receiving in the duration of 1 microframe
- *
- * Only the active configuration is examined. The calculation is based on the
- * wMaxPacketSize field in the endpoint descriptor as described in section
- * 9.6.6 in the USB 2.0 specifications.
- *
- * If acting on an isochronous or interrupt endpoint, this function will
- * multiply the value found in bits 0:10 by the number of transactions per
- * microframe (determined by bits 11:12). Otherwise, this function just
- * returns the numeric value found in bits 0:10.
- *
- * This function is useful for setting up isochronous transfers, for example
- * you might pass the return value from this function to
- * libusb_set_iso_packet_lengths() in order to set the length field of every
- * isochronous packet in a transfer.
- *
- * Since v1.0.3.
- *
- * \param dev a device
- * \param endpoint address of the endpoint in question
- * \returns the maximum packet size which can be sent/received on this endpoint
- * \returns LIBUSB_ERROR_NOT_FOUND if the endpoint does not exist
- * \returns LIBUSB_ERROR_OTHER on other failure
- */
-int API_EXPORTED libusb_get_max_iso_packet_size(libusb_device *dev,
- unsigned char endpoint)
-{
- struct libusb_config_descriptor *config;
- const struct libusb_endpoint_descriptor *ep;
- enum libusb_transfer_type ep_type;
- uint16_t val;
- int r;
-
- r = libusb_get_active_config_descriptor(dev, &config);
- if (r < 0) {
- usbi_err(DEVICE_CTX(dev),
- "could not retrieve active config descriptor");
- return LIBUSB_ERROR_OTHER;
- }
-
- ep = find_endpoint(config, endpoint);
- if (!ep) {
- r = LIBUSB_ERROR_NOT_FOUND;
- goto out;
- }
-
- val = ep->wMaxPacketSize;
- ep_type = (enum libusb_transfer_type) (ep->bmAttributes & 0x3);
-
- r = val & 0x07ff;
- if (ep_type == LIBUSB_TRANSFER_TYPE_ISOCHRONOUS
- || ep_type == LIBUSB_TRANSFER_TYPE_INTERRUPT)
- r *= (1 + ((val >> 11) & 3));
-
-out:
- libusb_free_config_descriptor(config);
- return r;
-}
-
-/** \ingroup libusb_dev
- * Increment the reference count of a device.
- * \param dev the device to reference
- * \returns the same device
- */
-DEFAULT_VISIBILITY
-libusb_device * LIBUSB_CALL libusb_ref_device(libusb_device *dev)
-{
- usbi_mutex_lock(&dev->lock);
- dev->refcnt++;
- usbi_mutex_unlock(&dev->lock);
- return dev;
-}
-
-/** \ingroup libusb_dev
- * Decrement the reference count of a device. If the decrement operation
- * causes the reference count to reach zero, the device shall be destroyed.
- * \param dev the device to unreference
- */
-void API_EXPORTED libusb_unref_device(libusb_device *dev)
-{
- int refcnt;
-
- if (!dev)
- return;
-
- usbi_mutex_lock(&dev->lock);
- refcnt = --dev->refcnt;
- usbi_mutex_unlock(&dev->lock);
-
- if (refcnt == 0) {
- usbi_dbg("destroy device %d.%d", dev->bus_number, dev->device_address);
-
- libusb_unref_device(dev->parent_dev);
-
- if (usbi_backend.destroy_device)
- usbi_backend.destroy_device(dev);
-
- if (!libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG)) {
- /* backend does not support hotplug */
- usbi_disconnect_device(dev);
- }
-
- usbi_mutex_destroy(&dev->lock);
- free(dev);
- }
-}
-
-/*
- * Signal the event pipe so that the event handling thread will be
- * interrupted to process an internal event.
- */
-int usbi_signal_event(struct libusb_context *ctx)
-{
- unsigned char dummy = 1;
- ssize_t r;
-
- /* write some data on event pipe to interrupt event handlers */
- r = usbi_write(ctx->event_pipe[1], &dummy, sizeof(dummy));
- if (r != sizeof(dummy)) {
- usbi_warn(ctx, "internal signalling write failed");
- return LIBUSB_ERROR_IO;
- }
-
- return 0;
-}
-
-/*
- * Clear the event pipe so that the event handling will no longer be
- * interrupted.
- */
-int usbi_clear_event(struct libusb_context *ctx)
-{
- unsigned char dummy;
- ssize_t r;
-
- /* read some data on event pipe to clear it */
- r = usbi_read(ctx->event_pipe[0], &dummy, sizeof(dummy));
- if (r != sizeof(dummy)) {
- usbi_warn(ctx, "internal signalling read failed");
- return LIBUSB_ERROR_IO;
- }
-
- return 0;
-}
-
-libusb_device * LIBUSB_CALL libusb_get_device_with_fd(libusb_context *ctx,
- int vid, int pid, const char *serial, int fd, int busnum, int devaddr) {
- usbi_dbg("libusb_get_device_with_fd, fd:%d, serial:%s", fd, serial);
-
- struct libusb_device *device = NULL;
- // android_generate_device内でusbi_alloc_deviceが呼ばれた時に参照カウンタは1
- int ret = linux_generate_device(ctx, &device, vid, pid, serial, fd, busnum, devaddr);
- if (ret) {
- usbi_err(ctx, "libusb_get_device_with_fd");
- device = NULL;
- }
- return device;
-}
-
-
-/** \ingroup libusb_dev
- * Open a device and obtain a device handle. A handle allows you to perform
- * I/O on the device in question.
- *
- * Internally, this function adds a reference to the device and makes it
- * available to you through libusb_get_device(). This reference is removed
- * during libusb_close().
- *
- * This is a non-blocking function; no requests are sent over the bus.
- *
- * \param dev the device to open
- * \param dev_handle output location for the returned device handle pointer. Only
- * populated when the return code is 0.
- * \returns 0 on success
- * \returns LIBUSB_ERROR_NO_MEM on memory allocation failure
- * \returns LIBUSB_ERROR_ACCESS if the user has insufficient permissions
- * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
- * \returns another LIBUSB_ERROR code on other failure
- */
-int API_EXPORTED libusb_open(libusb_device *dev,
- libusb_device_handle **dev_handle)
-{
- struct libusb_context *ctx = DEVICE_CTX(dev);
- struct libusb_device_handle *_dev_handle;
- size_t priv_size = usbi_backend.device_handle_priv_size;
- int r;
- usbi_dbg("open %d.%d", dev->bus_number, dev->device_address);
- __android_log_write(ANDROID_LOG_ERROR, "libusb", "haha");
-
- if (!dev->attached) {
- return LIBUSB_ERROR_NO_DEVICE;
- }
-
- _dev_handle = malloc(sizeof(*_dev_handle) + priv_size);
- if (!_dev_handle)
- return LIBUSB_ERROR_NO_MEM;
-
- r = usbi_mutex_init(&_dev_handle->lock);
- if (r) {
- free(_dev_handle);
- return LIBUSB_ERROR_OTHER;
- }
-
- _dev_handle->dev = libusb_ref_device(dev);
- _dev_handle->auto_detach_kernel_driver = 0;
- _dev_handle->claimed_interfaces = 0;
- memset(&_dev_handle->os_priv, 0, priv_size);
-
- r = usbi_backend.open(_dev_handle);
- if (r < 0) {
- usbi_dbg("open %d.%d returns %d", dev->bus_number, dev->device_address, r);
- libusb_unref_device(dev);
- usbi_mutex_destroy(&_dev_handle->lock);
- free(_dev_handle);
- return r;
- }
-
- usbi_mutex_lock(&ctx->open_devs_lock);
- list_add(&_dev_handle->list, &ctx->open_devs);
- usbi_mutex_unlock(&ctx->open_devs_lock);
- *dev_handle = _dev_handle;
-
- return 0;
-}
-
-/** \ingroup libusb_dev
- * Convenience function for finding a device with a particular
- * <tt>idVendor</tt>/<tt>idProduct</tt> combination. This function is intended
- * for those scenarios where you are using libusb to knock up a quick test
- * application - it allows you to avoid calling libusb_get_device_list() and
- * worrying about traversing/freeing the list.
- *
- * This function has limitations and is hence not intended for use in real
- * applications: if multiple devices have the same IDs it will only
- * give you the first one, etc.
- *
- * \param ctx the context to operate on, or NULL for the default context
- * \param vendor_id the idVendor value to search for
- * \param product_id the idProduct value to search for
- * \returns a device handle for the first found device, or NULL on error
- * or if the device could not be found. */
-DEFAULT_VISIBILITY
-libusb_device_handle * LIBUSB_CALL libusb_open_device_with_vid_pid(
- libusb_context *ctx, uint16_t vendor_id, uint16_t product_id)
-{
- struct libusb_device **devs;
- struct libusb_device *found = NULL;
- struct libusb_device *dev;
- struct libusb_device_handle *dev_handle = NULL;
- size_t i = 0;
- int r;
-
- if (libusb_get_device_list(ctx, &devs) < 0)
- return NULL;
-
- while ((dev = devs[i++]) != NULL) {
- struct libusb_device_descriptor desc;
- r = libusb_get_device_descriptor(dev, &desc);
- if (r < 0)
- goto out;
- if (desc.idVendor == vendor_id && desc.idProduct == product_id) {
- found = dev;
- break;
- }
- }
-
- if (found) {
- r = libusb_open(found, &dev_handle);
- if (r < 0)
- dev_handle = NULL;
- }
-
-out:
- libusb_free_device_list(devs, 1);
- return dev_handle;
-}
-
-static void do_close(struct libusb_context *ctx,
- struct libusb_device_handle *dev_handle)
-{
- struct usbi_transfer *itransfer;
- struct usbi_transfer *tmp;
-
- /* remove any transfers in flight that are for this device */
- usbi_mutex_lock(&ctx->flying_transfers_lock);
-
- /* safe iteration because transfers may be being deleted */
- list_for_each_entry_safe(itransfer, tmp, &ctx->flying_transfers, list, struct usbi_transfer) {
- struct libusb_transfer *transfer =
- USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
-
- if (transfer->dev_handle != dev_handle)
- continue;
-
- usbi_mutex_lock(&itransfer->lock);
- if (!(itransfer->state_flags & USBI_TRANSFER_DEVICE_DISAPPEARED)) {
- usbi_err(ctx, "Device handle closed while transfer was still being processed, but the device is still connected as far as we know");
-
- if (itransfer->state_flags & USBI_TRANSFER_CANCELLING)
- usbi_warn(ctx, "A cancellation for an in-flight transfer hasn't completed but closing the device handle");
- else
- usbi_err(ctx, "A cancellation hasn't even been scheduled on the transfer for which the device is closing");
- }
- usbi_mutex_unlock(&itransfer->lock);
-
- /* remove from the list of in-flight transfers and make sure
- * we don't accidentally use the device handle in the future
- * (or that such accesses will be easily caught and identified as a crash)
- */
- list_del(&itransfer->list);
- transfer->dev_handle = NULL;
-
- /* it is up to the user to free up the actual transfer struct. this is
- * just making sure that we don't attempt to process the transfer after
- * the device handle is invalid
- */
- usbi_dbg("Removed transfer %p from the in-flight list because device handle %p closed",
- transfer, dev_handle);
- }
- usbi_mutex_unlock(&ctx->flying_transfers_lock);
-
- usbi_mutex_lock(&ctx->open_devs_lock);
- list_del(&dev_handle->list);
- usbi_mutex_unlock(&ctx->open_devs_lock);
-
- usbi_backend.close(dev_handle);
- libusb_unref_device(dev_handle->dev);
- usbi_mutex_destroy(&dev_handle->lock);
- free(dev_handle);
-}
-
-/** \ingroup libusb_dev
- * Close a device handle. Should be called on all open handles before your
- * application exits.
- *
- * Internally, this function destroys the reference that was added by
- * libusb_open() on the given device.
- *
- * This is a non-blocking function; no requests are sent over the bus.
- *
- * \param dev_handle the device handle to close
- */
-void API_EXPORTED libusb_close(libusb_device_handle *dev_handle)
-{
- struct libusb_context *ctx;
- int handling_events;
- int pending_events;
-
- if (!dev_handle)
- return;
- usbi_dbg("");
-
- ctx = HANDLE_CTX(dev_handle);
- handling_events = usbi_handling_events(ctx);
-
- /* Similarly to libusb_open(), we want to interrupt all event handlers
- * at this point. More importantly, we want to perform the actual close of
- * the device while holding the event handling lock (preventing any other
- * thread from doing event handling) because we will be removing a file
- * descriptor from the polling loop. If this is being called by the current
- * event handler, we can bypass the interruption code because we already
- * hold the event handling lock. */
-
- if (!handling_events) {
- /* Record that we are closing a device.
- * Only signal an event if there are no prior pending events. */
- usbi_mutex_lock(&ctx->event_data_lock);
- pending_events = usbi_pending_events(ctx);
- ctx->device_close++;
- if (!pending_events)
- usbi_signal_event(ctx);
- usbi_mutex_unlock(&ctx->event_data_lock);
-
- /* take event handling lock */
- libusb_lock_events(ctx);
- }
-
- /* Close the device */
- do_close(ctx, dev_handle);
-
- if (!handling_events) {
- /* We're done with closing this device.
- * Clear the event pipe if there are no further pending events. */
- usbi_mutex_lock(&ctx->event_data_lock);
- ctx->device_close--;
- pending_events = usbi_pending_events(ctx);
- if (!pending_events)
- usbi_clear_event(ctx);
- usbi_mutex_unlock(&ctx->event_data_lock);
-
- /* Release event handling lock and wake up event waiters */
- libusb_unlock_events(ctx);
- }
-}
-
-/** \ingroup libusb_dev
- * Get the underlying device for a device handle. This function does not modify
- * the reference count of the returned device, so do not feel compelled to
- * unreference it when you are done.
- * \param dev_handle a device handle
- * \returns the underlying device
- */
-DEFAULT_VISIBILITY
-libusb_device * LIBUSB_CALL libusb_get_device(libusb_device_handle *dev_handle)
-{
- return dev_handle->dev;
-}
-
-/** \ingroup libusb_dev
- * Determine the bConfigurationValue of the currently active configuration.
- *
- * You could formulate your own control request to obtain this information,
- * but this function has the advantage that it may be able to retrieve the
- * information from operating system caches (no I/O involved).
- *
- * If the OS does not cache this information, then this function will block
- * while a control transfer is submitted to retrieve the information.
- *
- * This function will return a value of 0 in the <tt>config</tt> output
- * parameter if the device is in unconfigured state.
- *
- * \param dev_handle a device handle
- * \param config output location for the bConfigurationValue of the active
- * configuration (only valid for return code 0)
- * \returns 0 on success
- * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
- * \returns another LIBUSB_ERROR code on other failure
- */
-int API_EXPORTED libusb_get_configuration(libusb_device_handle *dev_handle,
- int *config)
-{
- int r = LIBUSB_ERROR_NOT_SUPPORTED;
-
- usbi_dbg("");
- if (usbi_backend.get_configuration)
- r = usbi_backend.get_configuration(dev_handle, config);
-
- if (r == LIBUSB_ERROR_NOT_SUPPORTED) {
- uint8_t tmp = 0;
- usbi_dbg("falling back to control message");
- r = libusb_control_transfer(dev_handle, LIBUSB_ENDPOINT_IN,
- LIBUSB_REQUEST_GET_CONFIGURATION, 0, 0, &tmp, 1, 1000);
- if (r == 0) {
- usbi_err(HANDLE_CTX(dev_handle), "zero bytes returned in ctrl transfer?");
- r = LIBUSB_ERROR_IO;
- } else if (r == 1) {
- r = 0;
- *config = tmp;
- } else {
- usbi_dbg("control failed, error %d", r);
- }
- }
-
- if (r == 0)
- usbi_dbg("active config %d", *config);
-
- return r;
-}
-
-/** \ingroup libusb_dev
- * Set the active configuration for a device.
- *
- * The operating system may or may not have already set an active
- * configuration on the device. It is up to your application to ensure the
- * correct configuration is selected before you attempt to claim interfaces
- * and perform other operations.
- *
- * If you call this function on a device already configured with the selected
- * configuration, then this function will act as a lightweight device reset:
- * it will issue a SET_CONFIGURATION request using the current configuration,
- * causing most USB-related device state to be reset (altsetting reset to zero,
- * endpoint halts cleared, toggles reset).
- *
- * You cannot change/reset configuration if your application has claimed
- * interfaces. It is advised to set the desired configuration before claiming
- * interfaces.
- *
- * Alternatively you can call libusb_release_interface() first. Note if you
- * do things this way you must ensure that auto_detach_kernel_driver for
- * <tt>dev</tt> is 0, otherwise the kernel driver will be re-attached when you
- * release the interface(s).
- *
- * You cannot change/reset configuration if other applications or drivers have
- * claimed interfaces.
- *
- * A configuration value of -1 will put the device in unconfigured state.
- * The USB specifications state that a configuration value of 0 does this,
- * however buggy devices exist which actually have a configuration 0.
- *
- * You should always use this function rather than formulating your own
- * SET_CONFIGURATION control request. This is because the underlying operating
- * system needs to know when such changes happen.
- *
- * This is a blocking function.
- *
- * \param dev_handle a device handle
- * \param configuration the bConfigurationValue of the configuration you
- * wish to activate, or -1 if you wish to put the device in an unconfigured
- * state
- * \returns 0 on success
- * \returns LIBUSB_ERROR_NOT_FOUND if the requested configuration does not exist
- * \returns LIBUSB_ERROR_BUSY if interfaces are currently claimed
- * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
- * \returns another LIBUSB_ERROR code on other failure
- * \see libusb_set_auto_detach_kernel_driver()
- */
-int API_EXPORTED libusb_set_configuration(libusb_device_handle *dev_handle,
- int configuration)
-{
- usbi_dbg("configuration %d", configuration);
- return usbi_backend.set_configuration(dev_handle, configuration);
-}
-
-/** \ingroup libusb_dev
- * Claim an interface on a given device handle. You must claim the interface
- * you wish to use before you can perform I/O on any of its endpoints.
- *
- * It is legal to attempt to claim an already-claimed interface, in which
- * case libusb just returns 0 without doing anything.
- *
- * If auto_detach_kernel_driver is set to 1 for <tt>dev</tt>, the kernel driver
- * will be detached if necessary, on failure the detach error is returned.
- *
- * Claiming of interfaces is a purely logical operation; it does not cause
- * any requests to be sent over the bus. Interface claiming is used to
- * instruct the underlying operating system that your application wishes
- * to take ownership of the interface.
- *
- * This is a non-blocking function.
- *
- * \param dev_handle a device handle
- * \param interface_number the <tt>bInterfaceNumber</tt> of the interface you
- * wish to claim
- * \returns 0 on success
- * \returns LIBUSB_ERROR_NOT_FOUND if the requested interface does not exist
- * \returns LIBUSB_ERROR_BUSY if another program or driver has claimed the
- * interface
- * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
- * \returns a LIBUSB_ERROR code on other failure
- * \see libusb_set_auto_detach_kernel_driver()
- */
-int API_EXPORTED libusb_claim_interface(libusb_device_handle *dev_handle,
- int interface_number)
-{
- int r = 0;
-
- usbi_dbg("interface %d", interface_number);
- if (interface_number >= USB_MAXINTERFACES)
- return LIBUSB_ERROR_INVALID_PARAM;
-
- if (!dev_handle->dev->attached)
- return LIBUSB_ERROR_NO_DEVICE;
-
- usbi_mutex_lock(&dev_handle->lock);
- if (dev_handle->claimed_interfaces & (1 << interface_number))
- goto out;
-
- r = usbi_backend.claim_interface(dev_handle, interface_number);
- if (r == 0)
- dev_handle->claimed_interfaces |= 1 << interface_number;
-
-out:
- usbi_mutex_unlock(&dev_handle->lock);
- return r;
-}
-
-/** \ingroup libusb_dev
- * Release an interface previously claimed with libusb_claim_interface(). You
- * should release all claimed interfaces before closing a device handle.
- *
- * This is a blocking function. A SET_INTERFACE control request will be sent
- * to the device, resetting interface state to the first alternate setting.
- *
- * If auto_detach_kernel_driver is set to 1 for <tt>dev</tt>, the kernel
- * driver will be re-attached after releasing the interface.
- *
- * \param dev_handle a device handle
- * \param interface_number the <tt>bInterfaceNumber</tt> of the
- * previously-claimed interface
- * \returns 0 on success
- * \returns LIBUSB_ERROR_NOT_FOUND if the interface was not claimed
- * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
- * \returns another LIBUSB_ERROR code on other failure
- * \see libusb_set_auto_detach_kernel_driver()
- */
-int API_EXPORTED libusb_release_interface(libusb_device_handle *dev_handle,
- int interface_number)
-{
- int r;
-
- usbi_dbg("interface %d", interface_number);
- if (interface_number >= USB_MAXINTERFACES)
- return LIBUSB_ERROR_INVALID_PARAM;
-
- usbi_mutex_lock(&dev_handle->lock);
- if (!(dev_handle->claimed_interfaces & (1 << interface_number))) {
- r = LIBUSB_ERROR_NOT_FOUND;
- goto out;
- }
-
- r = usbi_backend.release_interface(dev_handle, interface_number);
- if (r == 0)
- dev_handle->claimed_interfaces &= ~(1 << interface_number);
-
-out:
- usbi_mutex_unlock(&dev_handle->lock);
- return r;
-}
-
-/** \ingroup libusb_dev
- * Activate an alternate setting for an interface. The interface must have
- * been previously claimed with libusb_claim_interface().
- *
- * You should always use this function rather than formulating your own
- * SET_INTERFACE control request. This is because the underlying operating
- * system needs to know when such changes happen.
- *
- * This is a blocking function.
- *
- * \param dev_handle a device handle
- * \param interface_number the <tt>bInterfaceNumber</tt> of the
- * previously-claimed interface
- * \param alternate_setting the <tt>bAlternateSetting</tt> of the alternate
- * setting to activate
- * \returns 0 on success
- * \returns LIBUSB_ERROR_NOT_FOUND if the interface was not claimed, or the
- * requested alternate setting does not exist
- * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
- * \returns another LIBUSB_ERROR code on other failure
- */
-int API_EXPORTED libusb_set_interface_alt_setting(libusb_device_handle *dev_handle,
- int interface_number, int alternate_setting)
-{
- usbi_dbg("interface %d altsetting %d",
- interface_number, alternate_setting);
- if (interface_number >= USB_MAXINTERFACES)
- return LIBUSB_ERROR_INVALID_PARAM;
-
- usbi_mutex_lock(&dev_handle->lock);
- if (!dev_handle->dev->attached) {
- usbi_mutex_unlock(&dev_handle->lock);
- return LIBUSB_ERROR_NO_DEVICE;
- }
-
- if (!(dev_handle->claimed_interfaces & (1 << interface_number))) {
- usbi_mutex_unlock(&dev_handle->lock);
- return LIBUSB_ERROR_NOT_FOUND;
- }
- usbi_mutex_unlock(&dev_handle->lock);
-
- return usbi_backend.set_interface_altsetting(dev_handle, interface_number,
- alternate_setting);
-}
-
-/** \ingroup libusb_dev
- * Clear the halt/stall condition for an endpoint. Endpoints with halt status
- * are unable to receive or transmit data until the halt condition is stalled.
- *
- * You should cancel all pending transfers before attempting to clear the halt
- * condition.
- *
- * This is a blocking function.
- *
- * \param dev_handle a device handle
- * \param endpoint the endpoint to clear halt status
- * \returns 0 on success
- * \returns LIBUSB_ERROR_NOT_FOUND if the endpoint does not exist
- * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
- * \returns another LIBUSB_ERROR code on other failure
- */
-int API_EXPORTED libusb_clear_halt(libusb_device_handle *dev_handle,
- unsigned char endpoint)
-{
- usbi_dbg("endpoint %x", endpoint);
- if (!dev_handle->dev->attached)
- return LIBUSB_ERROR_NO_DEVICE;
-
- return usbi_backend.clear_halt(dev_handle, endpoint);
-}
-
-/** \ingroup libusb_dev
- * Perform a USB port reset to reinitialize a device. The system will attempt
- * to restore the previous configuration and alternate settings after the
- * reset has completed.
- *
- * If the reset fails, the descriptors change, or the previous state cannot be
- * restored, the device will appear to be disconnected and reconnected. This
- * means that the device handle is no longer valid (you should close it) and
- * rediscover the device. A return code of LIBUSB_ERROR_NOT_FOUND indicates
- * when this is the case.
- *
- * This is a blocking function which usually incurs a noticeable delay.
- *
- * \param dev_handle a handle of the device to reset
- * \returns 0 on success
- * \returns LIBUSB_ERROR_NOT_FOUND if re-enumeration is required, or if the
- * device has been disconnected
- * \returns another LIBUSB_ERROR code on other failure
- */
-int API_EXPORTED libusb_reset_device(libusb_device_handle *dev_handle)
-{
- usbi_dbg("");
- if (!dev_handle->dev->attached)
- return LIBUSB_ERROR_NO_DEVICE;
-
- return usbi_backend.reset_device(dev_handle);
-}
-
-/** \ingroup libusb_asyncio
- * Allocate up to num_streams usb bulk streams on the specified endpoints. This
- * function takes an array of endpoints rather then a single endpoint because
- * some protocols require that endpoints are setup with similar stream ids.
- * All endpoints passed in must belong to the same interface.
- *
- * Note this function may return less streams then requested. Also note that the
- * same number of streams are allocated for each endpoint in the endpoint array.
- *
- * Stream id 0 is reserved, and should not be used to communicate with devices.
- * If libusb_alloc_streams() returns with a value of N, you may use stream ids
- * 1 to N.
- *
- * Since version 1.0.19, \ref LIBUSB_API_VERSION >= 0x01000103
- *
- * \param dev_handle a device handle
- * \param num_streams number of streams to try to allocate
- * \param endpoints array of endpoints to allocate streams on
- * \param num_endpoints length of the endpoints array
- * \returns number of streams allocated, or a LIBUSB_ERROR code on failure
- */
-int API_EXPORTED libusb_alloc_streams(libusb_device_handle *dev_handle,
- uint32_t num_streams, unsigned char *endpoints, int num_endpoints)
-{
- usbi_dbg("streams %u eps %d", (unsigned) num_streams, num_endpoints);
-
- if (!dev_handle->dev->attached)
- return LIBUSB_ERROR_NO_DEVICE;
-
- if (usbi_backend.alloc_streams)
- return usbi_backend.alloc_streams(dev_handle, num_streams, endpoints,
- num_endpoints);
- else
- return LIBUSB_ERROR_NOT_SUPPORTED;
-}
-
-/** \ingroup libusb_asyncio
- * Free usb bulk streams allocated with libusb_alloc_streams().
- *
- * Note streams are automatically free-ed when releasing an interface.
- *
- * Since version 1.0.19, \ref LIBUSB_API_VERSION >= 0x01000103
- *
- * \param dev_handle a device handle
- * \param endpoints array of endpoints to free streams on
- * \param num_endpoints length of the endpoints array
- * \returns LIBUSB_SUCCESS, or a LIBUSB_ERROR code on failure
- */
-int API_EXPORTED libusb_free_streams(libusb_device_handle *dev_handle,
- unsigned char *endpoints, int num_endpoints)
-{
- usbi_dbg("eps %d", num_endpoints);
-
- if (!dev_handle->dev->attached)
- return LIBUSB_ERROR_NO_DEVICE;
-
- if (usbi_backend.free_streams)
- return usbi_backend.free_streams(dev_handle, endpoints,
- num_endpoints);
- else
- return LIBUSB_ERROR_NOT_SUPPORTED;
-}
-
-/** \ingroup libusb_asyncio
- * Attempts to allocate a block of persistent DMA memory suitable for transfers
- * against the given device. If successful, will return a block of memory
- * that is suitable for use as "buffer" in \ref libusb_transfer against this
- * device. Using this memory instead of regular memory means that the host
- * controller can use DMA directly into the buffer to increase performance, and
- * also that transfers can no longer fail due to kernel memory fragmentation.
- *
- * Note that this means you should not modify this memory (or even data on
- * the same cache lines) when a transfer is in progress, although it is legal
- * to have several transfers going on within the same memory block.
- *
- * Will return NULL on failure. Many systems do not support such zerocopy
- * and will always return NULL. Memory allocated with this function must be
- * freed with \ref libusb_dev_mem_free. Specifically, this means that the
- * flag \ref LIBUSB_TRANSFER_FREE_BUFFER cannot be used to free memory allocated
- * with this function.
- *
- * Since version 1.0.21, \ref LIBUSB_API_VERSION >= 0x01000105
- *
- * \param dev_handle a device handle
- * \param length size of desired data buffer
- * \returns a pointer to the newly allocated memory, or NULL on failure
- */
-DEFAULT_VISIBILITY
-unsigned char * LIBUSB_CALL libusb_dev_mem_alloc(libusb_device_handle *dev_handle,
- size_t length)
-{
- if (!dev_handle->dev->attached)
- return NULL;
-
- if (usbi_backend.dev_mem_alloc)
- return usbi_backend.dev_mem_alloc(dev_handle, length);
- else
- return NULL;
-}
-
-/** \ingroup libusb_asyncio
- * Free device memory allocated with libusb_dev_mem_alloc().
- *
- * \param dev_handle a device handle
- * \param buffer pointer to the previously allocated memory
- * \param length size of previously allocated memory
- * \returns LIBUSB_SUCCESS, or a LIBUSB_ERROR code on failure
- */
-int API_EXPORTED libusb_dev_mem_free(libusb_device_handle *dev_handle,
- unsigned char *buffer, size_t length)
-{
- if (usbi_backend.dev_mem_free)
- return usbi_backend.dev_mem_free(dev_handle, buffer, length);
- else
- return LIBUSB_ERROR_NOT_SUPPORTED;
-}
-
-/** \ingroup libusb_dev
- * Determine if a kernel driver is active on an interface. If a kernel driver
- * is active, you cannot claim the interface, and libusb will be unable to
- * perform I/O.
- *
- * This functionality is not available on Windows.
- *
- * \param dev_handle a device handle
- * \param interface_number the interface to check
- * \returns 0 if no kernel driver is active
- * \returns 1 if a kernel driver is active
- * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
- * \returns LIBUSB_ERROR_NOT_SUPPORTED on platforms where the functionality
- * is not available
- * \returns another LIBUSB_ERROR code on other failure
- * \see libusb_detach_kernel_driver()
- */
-int API_EXPORTED libusb_kernel_driver_active(libusb_device_handle *dev_handle,
- int interface_number)
-{
- usbi_dbg("interface %d", interface_number);
-
- if (!dev_handle->dev->attached)
- return LIBUSB_ERROR_NO_DEVICE;
-
- if (usbi_backend.kernel_driver_active)
- return usbi_backend.kernel_driver_active(dev_handle, interface_number);
- else
- return LIBUSB_ERROR_NOT_SUPPORTED;
-}
-
-/** \ingroup libusb_dev
- * Detach a kernel driver from an interface. If successful, you will then be
- * able to claim the interface and perform I/O.
- *
- * This functionality is not available on Darwin or Windows.
- *
- * Note that libusb itself also talks to the device through a special kernel
- * driver, if this driver is already attached to the device, this call will
- * not detach it and return LIBUSB_ERROR_NOT_FOUND.
- *
- * \param dev_handle a device handle
- * \param interface_number the interface to detach the driver from
- * \returns 0 on success
- * \returns LIBUSB_ERROR_NOT_FOUND if no kernel driver was active
- * \returns LIBUSB_ERROR_INVALID_PARAM if the interface does not exist
- * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
- * \returns LIBUSB_ERROR_NOT_SUPPORTED on platforms where the functionality
- * is not available
- * \returns another LIBUSB_ERROR code on other failure
- * \see libusb_kernel_driver_active()
- */
-int API_EXPORTED libusb_detach_kernel_driver(libusb_device_handle *dev_handle,
- int interface_number)
-{
- usbi_dbg("interface %d", interface_number);
-
- if (!dev_handle->dev->attached)
- return LIBUSB_ERROR_NO_DEVICE;
-
- if (usbi_backend.detach_kernel_driver)
- return usbi_backend.detach_kernel_driver(dev_handle, interface_number);
- else
- return LIBUSB_ERROR_NOT_SUPPORTED;
-}
-
-/** \ingroup libusb_dev
- * Re-attach an interface's kernel driver, which was previously detached
- * using libusb_detach_kernel_driver(). This call is only effective on
- * Linux and returns LIBUSB_ERROR_NOT_SUPPORTED on all other platforms.
- *
- * This functionality is not available on Darwin or Windows.
- *
- * \param dev_handle a device handle
- * \param interface_number the interface to attach the driver from
- * \returns 0 on success
- * \returns LIBUSB_ERROR_NOT_FOUND if no kernel driver was active
- * \returns LIBUSB_ERROR_INVALID_PARAM if the interface does not exist
- * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected
- * \returns LIBUSB_ERROR_NOT_SUPPORTED on platforms where the functionality
- * is not available
- * \returns LIBUSB_ERROR_BUSY if the driver cannot be attached because the
- * interface is claimed by a program or driver
- * \returns another LIBUSB_ERROR code on other failure
- * \see libusb_kernel_driver_active()
- */
-int API_EXPORTED libusb_attach_kernel_driver(libusb_device_handle *dev_handle,
- int interface_number)
-{
- usbi_dbg("interface %d", interface_number);
-
- if (!dev_handle->dev->attached)
- return LIBUSB_ERROR_NO_DEVICE;
-
- if (usbi_backend.attach_kernel_driver)
- return usbi_backend.attach_kernel_driver(dev_handle, interface_number);
- else
- return LIBUSB_ERROR_NOT_SUPPORTED;
-}
-
-/** \ingroup libusb_dev
- * Enable/disable libusb's automatic kernel driver detachment. When this is
- * enabled libusb will automatically detach the kernel driver on an interface
- * when claiming the interface, and attach it when releasing the interface.
- *
- * Automatic kernel driver detachment is disabled on newly opened device
- * handles by default.
- *
- * On platforms which do not have LIBUSB_CAP_SUPPORTS_DETACH_KERNEL_DRIVER
- * this function will return LIBUSB_ERROR_NOT_SUPPORTED, and libusb will
- * continue as if this function was never called.
- *
- * \param dev_handle a device handle
- * \param enable whether to enable or disable auto kernel driver detachment
- *
- * \returns LIBUSB_SUCCESS on success
- * \returns LIBUSB_ERROR_NOT_SUPPORTED on platforms where the functionality
- * is not available
- * \see libusb_claim_interface()
- * \see libusb_release_interface()
- * \see libusb_set_configuration()
- */
-int API_EXPORTED libusb_set_auto_detach_kernel_driver(
- libusb_device_handle *dev_handle, int enable)
-{
- if (!(usbi_backend.caps & USBI_CAP_SUPPORTS_DETACH_KERNEL_DRIVER))
- return LIBUSB_ERROR_NOT_SUPPORTED;
-
- dev_handle->auto_detach_kernel_driver = enable;
- return LIBUSB_SUCCESS;
-}
-
-/** \ingroup libusb_lib
- * \deprecated Use libusb_set_option() instead using the
- * \ref LIBUSB_OPTION_LOG_LEVEL option.
- */
-void API_EXPORTED libusb_set_debug(libusb_context *ctx, int level)
-{
-#if defined(ENABLE_LOGGING) && !defined(ENABLE_DEBUG_LOGGING)
- USBI_GET_CONTEXT(ctx);
- if (!ctx->debug_fixed) {
- level = CLAMP(level, LIBUSB_LOG_LEVEL_NONE, LIBUSB_LOG_LEVEL_DEBUG);
- ctx->debug = (enum libusb_log_level)level;
- }
-#else
- UNUSED(ctx);
- UNUSED(level);
-#endif
-}
-
-/** \ingroup libusb_lib
- * Set an option in the library.
- *
- * Use this function to configure a specific option within the library.
- *
- * Some options require one or more arguments to be provided. Consult each
- * option's documentation for specific requirements.
- *
- * Since version 1.0.22, \ref LIBUSB_API_VERSION >= 0x01000106
- *
- * \param ctx context on which to operate
- * \param option which option to set
- * \param ... any required arguments for the specified option
- *
- * \returns LIBUSB_SUCCESS on success
- * \returns LIBUSB_ERROR_INVALID_PARAM if the option or arguments are invalid
- * \returns LIBUSB_ERROR_NOT_SUPPORTED if the option is valid but not supported
- * on this platform
- */
-int API_EXPORTED libusb_set_option(libusb_context *ctx,
- enum libusb_option option, ...)
-{
- int arg, r = LIBUSB_SUCCESS;
- va_list ap;
-
- USBI_GET_CONTEXT(ctx);
-
- va_start(ap, option);
- switch (option) {
- case LIBUSB_OPTION_LOG_LEVEL:
- arg = va_arg(ap, int);
- if (arg < LIBUSB_LOG_LEVEL_NONE || arg > LIBUSB_LOG_LEVEL_DEBUG) {
- r = LIBUSB_ERROR_INVALID_PARAM;
- break;
- }
-#if defined(ENABLE_LOGGING) && !defined(ENABLE_DEBUG_LOGGING)
- if (!ctx->debug_fixed)
- ctx->debug = (enum libusb_log_level)arg;
-#endif
- break;
-
- /* Handle all backend-specific options here */
- case LIBUSB_OPTION_USE_USBDK:
- if (usbi_backend.set_option)
- r = usbi_backend.set_option(ctx, option, ap);
- else
- r = LIBUSB_ERROR_NOT_SUPPORTED;
- break;
-
- default:
- r = LIBUSB_ERROR_INVALID_PARAM;
- }
- va_end(ap);
-
- return r;
-}
-
-#if defined(ENABLE_LOGGING) && !defined(ENABLE_DEBUG_LOGGING)
-/* returns the log level as defined in the LIBUSB_DEBUG environment variable.
- * if LIBUSB_DEBUG is not present or not a number, returns LIBUSB_LOG_LEVEL_NONE.
- * value is clamped to ensure it is within the valid range of possibilities.
- */
-static enum libusb_log_level get_env_debug_level(void)
-{
- const char *dbg = getenv("LIBUSB_DEBUG");
- enum libusb_log_level level;
- if (dbg) {
- int dbg_level = atoi(dbg);
- dbg_level = CLAMP(dbg_level, LIBUSB_LOG_LEVEL_NONE, LIBUSB_LOG_LEVEL_DEBUG);
- level = (enum libusb_log_level)dbg_level;
- } else {
- level = LIBUSB_LOG_LEVEL_NONE;
- }
- return level;
-}
-#endif
-
-/** \ingroup libusb_lib
- * Initialize libusb. This function must be called before calling any other
- * libusb function.
- *
- * If you do not provide an output location for a context pointer, a default
- * context will be created. If there was already a default context, it will
- * be reused (and nothing will be initialized/reinitialized).
- *
- * \param context Optional output location for context pointer.
- * Only valid on return code 0.
- * \returns 0 on success, or a LIBUSB_ERROR code on failure
- * \see libusb_contexts
- */
-int API_EXPORTED libusb_init(libusb_context **context)
-{
- struct libusb_device *dev, *next;
- size_t priv_size = usbi_backend.context_priv_size;
- struct libusb_context *ctx;
- static int first_init = 1;
- int r = 0;
-
- usbi_mutex_static_lock(&default_context_lock);
-
- if (!timestamp_origin.tv_sec) {
- usbi_backend.clock_gettime(USBI_CLOCK_REALTIME, ×tamp_origin);
- }
-
- if (!context && usbi_default_context) {
- usbi_dbg("reusing default context");
- default_context_refcnt++;
- usbi_mutex_static_unlock(&default_context_lock);
- return 0;
- }
-
- ctx = calloc(1, sizeof(*ctx) + priv_size);
- if (!ctx) {
- r = LIBUSB_ERROR_NO_MEM;
- goto err_unlock;
- }
-
-#if defined(ENABLE_LOGGING) && !defined(ENABLE_DEBUG_LOGGING)
- ctx->debug = get_env_debug_level();
- if (ctx->debug != LIBUSB_LOG_LEVEL_NONE)
- ctx->debug_fixed = 1;
-#endif
-
- /* default context should be initialized before calling usbi_dbg */
- if (!usbi_default_context) {
- usbi_default_context = ctx;
- default_context_refcnt++;
- usbi_dbg("created default context");
- }
-
- usbi_dbg("libusb v%u.%u.%u.%u%s", libusb_version_internal.major, libusb_version_internal.minor,
- libusb_version_internal.micro, libusb_version_internal.nano, libusb_version_internal.rc);
-
- usbi_mutex_init(&ctx->usb_devs_lock);
- usbi_mutex_init(&ctx->open_devs_lock);
- usbi_mutex_init(&ctx->hotplug_cbs_lock);
- list_init(&ctx->usb_devs);
- list_init(&ctx->open_devs);
- list_init(&ctx->hotplug_cbs);
- ctx->next_hotplug_cb_handle = 1;
-
- usbi_mutex_static_lock(&active_contexts_lock);
- if (first_init) {
- first_init = 0;
- list_init (&active_contexts_list);
- }
- list_add (&ctx->list, &active_contexts_list);
- usbi_mutex_static_unlock(&active_contexts_lock);
-
- if (usbi_backend.init) {
- r = usbi_backend.init(ctx);
- if (r)
- goto err_free_ctx;
- }
-
- r = usbi_io_init(ctx);
- if (r < 0)
- goto err_backend_exit;
-
- usbi_mutex_static_unlock(&default_context_lock);
-
- if (context)
- *context = ctx;
-
- return 0;
-
-err_backend_exit:
- if (usbi_backend.exit)
- usbi_backend.exit(ctx);
-err_free_ctx:
- if (ctx == usbi_default_context) {
- usbi_default_context = NULL;
- default_context_refcnt--;
- }
-
- usbi_mutex_static_lock(&active_contexts_lock);
- list_del (&ctx->list);
- usbi_mutex_static_unlock(&active_contexts_lock);
-
- usbi_mutex_lock(&ctx->usb_devs_lock);
- list_for_each_entry_safe(dev, next, &ctx->usb_devs, list, struct libusb_device) {
- list_del(&dev->list);
- libusb_unref_device(dev);
- }
- usbi_mutex_unlock(&ctx->usb_devs_lock);
-
- usbi_mutex_destroy(&ctx->open_devs_lock);
- usbi_mutex_destroy(&ctx->usb_devs_lock);
- usbi_mutex_destroy(&ctx->hotplug_cbs_lock);
-
- free(ctx);
-err_unlock:
- usbi_mutex_static_unlock(&default_context_lock);
- return r;
-}
-
-/** \ingroup libusb_lib
- * Deinitialize libusb. Should be called after closing all open devices and
- * before your application terminates.
- * \param ctx the context to deinitialize, or NULL for the default context
- */
-void API_EXPORTED libusb_exit(struct libusb_context *ctx)
-{
- struct libusb_device *dev, *next;
- struct timeval tv = { 0, 0 };
-
- usbi_dbg("");
- USBI_GET_CONTEXT(ctx);
-
- /* if working with default context, only actually do the deinitialization
- * if we're the last user */
- usbi_mutex_static_lock(&default_context_lock);
- if (ctx == usbi_default_context) {
- if (--default_context_refcnt > 0) {
- usbi_dbg("not destroying default context");
- usbi_mutex_static_unlock(&default_context_lock);
- return;
- }
- usbi_dbg("destroying default context");
- usbi_default_context = NULL;
- }
- usbi_mutex_static_unlock(&default_context_lock);
-
- usbi_mutex_static_lock(&active_contexts_lock);
- list_del (&ctx->list);
- usbi_mutex_static_unlock(&active_contexts_lock);
-
- if (libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG)) {
- usbi_hotplug_deregister(ctx, 1);
-
- /*
- * Ensure any pending unplug events are read from the hotplug
- * pipe. The usb_device-s hold in the events are no longer part
- * of usb_devs, but the events still hold a reference!
- *
- * Note we don't do this if the application has left devices
- * open (which implies a buggy app) to avoid packet completion
- * handlers running when the app does not expect them to run.
- */
- if (list_empty(&ctx->open_devs))
- libusb_handle_events_timeout(ctx, &tv);
-
- usbi_mutex_lock(&ctx->usb_devs_lock);
- list_for_each_entry_safe(dev, next, &ctx->usb_devs, list, struct libusb_device) {
- list_del(&dev->list);
- libusb_unref_device(dev);
- }
- usbi_mutex_unlock(&ctx->usb_devs_lock);
- }
-
- /* a few sanity checks. don't bother with locking because unless
- * there is an application bug, nobody will be accessing these. */
- if (!list_empty(&ctx->usb_devs))
- usbi_warn(ctx, "some libusb_devices were leaked");
- if (!list_empty(&ctx->open_devs))
- usbi_warn(ctx, "application left some devices open");
-
- usbi_io_exit(ctx);
- if (usbi_backend.exit)
- usbi_backend.exit(ctx);
-
- usbi_mutex_destroy(&ctx->open_devs_lock);
- usbi_mutex_destroy(&ctx->usb_devs_lock);
- usbi_mutex_destroy(&ctx->hotplug_cbs_lock);
- free(ctx);
-}
-
-/** \ingroup libusb_misc
- * Check at runtime if the loaded library has a given capability.
- * This call should be performed after \ref libusb_init(), to ensure the
- * backend has updated its capability set.
- *
- * \param capability the \ref libusb_capability to check for
- * \returns nonzero if the running library has the capability, 0 otherwise
- */
-int API_EXPORTED libusb_has_capability(uint32_t capability)
-{
- switch (capability) {
- case LIBUSB_CAP_HAS_CAPABILITY:
- return 1;
- case LIBUSB_CAP_HAS_HOTPLUG:
- return !(usbi_backend.get_device_list);
- case LIBUSB_CAP_HAS_HID_ACCESS:
- return (usbi_backend.caps & USBI_CAP_HAS_HID_ACCESS);
- case LIBUSB_CAP_SUPPORTS_DETACH_KERNEL_DRIVER:
- return (usbi_backend.caps & USBI_CAP_SUPPORTS_DETACH_KERNEL_DRIVER);
- }
- return 0;
-}
-
-#ifdef ENABLE_LOGGING
-
-/* this is defined in libusbi.h if needed */
-#ifdef LIBUSB_PRINTF_WIN32
-/*
- * Prior to VS2015, Microsoft did not provide the snprintf() function and
- * provided a vsnprintf() that did not guarantee NULL-terminated output.
- * Microsoft did provide a _snprintf() function, but again it did not
- * guarantee NULL-terminated output.
- *
- * The below implementations guarantee NULL-terminated output and are
- * C99 compliant.
- */
-
-int usbi_snprintf(char *str, size_t size, const char *format, ...)
-{
- va_list ap;
- int ret;
-
- va_start(ap, format);
- ret = usbi_vsnprintf(str, size, format, ap);
- va_end(ap);
-
- return ret;
-}
-
-int usbi_vsnprintf(char *str, size_t size, const char *format, va_list ap)
-{
- int ret;
-
- ret = _vsnprintf(str, size, format, ap);
- if (ret < 0 || ret == (int)size) {
- /* Output is truncated, ensure buffer is NULL-terminated and
- * determine how many characters would have been written. */
- str[size - 1] = '\0';
- if (ret < 0)
- ret = _vsnprintf(NULL, 0, format, ap);
- }
-
- return ret;
-}
-#endif /* LIBUSB_PRINTF_WIN32 */
-
-static void usbi_log_str(enum libusb_log_level level, const char *str)
-{
-#if defined(USE_SYSTEM_LOGGING_FACILITY)
-#if defined(OS_WINDOWS)
- OutputDebugString(str);
-#elif defined(OS_WINCE)
- /* Windows CE only supports the Unicode version of OutputDebugString. */
- WCHAR wbuf[USBI_MAX_LOG_LEN];
- MultiByteToWideChar(CP_UTF8, 0, str, -1, wbuf, sizeof(wbuf));
- OutputDebugStringW(wbuf);
-#elif defined(__ANDROID__)
- int priority = ANDROID_LOG_UNKNOWN;
- switch (level) {
- case LIBUSB_LOG_LEVEL_NONE: return;
- case LIBUSB_LOG_LEVEL_ERROR: priority = ANDROID_LOG_ERROR; break;
- case LIBUSB_LOG_LEVEL_WARNING: priority = ANDROID_LOG_WARN; break;
- case LIBUSB_LOG_LEVEL_INFO: priority = ANDROID_LOG_INFO; break;
- case LIBUSB_LOG_LEVEL_DEBUG: priority = ANDROID_LOG_DEBUG; break;
- }
- __android_log_write(priority, "libusb", str);
-#elif defined(HAVE_SYSLOG_FUNC)
- int syslog_level = LOG_INFO;
- switch (level) {
- case LIBUSB_LOG_LEVEL_NONE: return;
- case LIBUSB_LOG_LEVEL_ERROR: syslog_level = LOG_ERR; break;
- case LIBUSB_LOG_LEVEL_WARNING: syslog_level = LOG_WARNING; break;
- case LIBUSB_LOG_LEVEL_INFO: syslog_level = LOG_INFO; break;
- case LIBUSB_LOG_LEVEL_DEBUG: syslog_level = LOG_DEBUG; break;
- }
- syslog(syslog_level, "%s", str);
-#else /* All of gcc, Clang, XCode seem to use #warning */
-#warning System logging is not supported on this platform. Logging to stderr will be used instead.
- fputs(str, stderr);
-#endif
-#else
- fputs(str, stderr);
-#endif /* USE_SYSTEM_LOGGING_FACILITY */
- UNUSED(level);
-}
-
-void usbi_log_v(struct libusb_context *ctx, enum libusb_log_level level,
- const char *function, const char *format, va_list args)
-{
- const char *prefix;
- char buf[USBI_MAX_LOG_LEN];
- struct timespec now;
- int global_debug, header_len, text_len;
- static int has_debug_header_been_displayed = 0;
-
-#ifdef ENABLE_DEBUG_LOGGING
- global_debug = 1;
- UNUSED(ctx);
-#else
- enum libusb_log_level ctx_level = LIBUSB_LOG_LEVEL_NONE;
-
- USBI_GET_CONTEXT(ctx);
- if (ctx)
- ctx_level = ctx->debug;
- else
- ctx_level = get_env_debug_level();
-
- if (ctx_level == LIBUSB_LOG_LEVEL_NONE)
- return;
- if (level == LIBUSB_LOG_LEVEL_WARNING && ctx_level < LIBUSB_LOG_LEVEL_WARNING)
- return;
- if (level == LIBUSB_LOG_LEVEL_INFO && ctx_level < LIBUSB_LOG_LEVEL_INFO)
- return;
- if (level == LIBUSB_LOG_LEVEL_DEBUG && ctx_level < LIBUSB_LOG_LEVEL_DEBUG)
- return;
-
- global_debug = (ctx_level == LIBUSB_LOG_LEVEL_DEBUG);
-#endif
-
- usbi_backend.clock_gettime(USBI_CLOCK_REALTIME, &now);
- if ((global_debug) && (!has_debug_header_been_displayed)) {
- has_debug_header_been_displayed = 1;
- usbi_log_str(LIBUSB_LOG_LEVEL_DEBUG, "[timestamp] [threadID] facility level [function call] <message>" USBI_LOG_LINE_END);
- usbi_log_str(LIBUSB_LOG_LEVEL_DEBUG, "--------------------------------------------------------------------------------" USBI_LOG_LINE_END);
- }
- if (now.tv_nsec < timestamp_origin.tv_nsec) {
- now.tv_sec--;
- now.tv_nsec += 1000000000L;
- }
- now.tv_sec -= timestamp_origin.tv_sec;
- now.tv_nsec -= timestamp_origin.tv_nsec;
-
- switch (level) {
- case LIBUSB_LOG_LEVEL_NONE:
- return;
- case LIBUSB_LOG_LEVEL_ERROR:
- prefix = "error";
- break;
- case LIBUSB_LOG_LEVEL_WARNING:
- prefix = "warning";
- break;
- case LIBUSB_LOG_LEVEL_INFO:
- prefix = "info";
- break;
- case LIBUSB_LOG_LEVEL_DEBUG:
- prefix = "debug";
- break;
- default:
- prefix = "unknown";
- break;
- }
-
- if (global_debug) {
- header_len = snprintf(buf, sizeof(buf),
- "[%2d.%06d] [%08x] libusb: %s [%s] ",
- (int)now.tv_sec, (int)(now.tv_nsec / 1000L), usbi_get_tid(), prefix, function);
- } else {
- header_len = snprintf(buf, sizeof(buf),
- "libusb: %s [%s] ", prefix, function);
- }
-
- if (header_len < 0 || header_len >= (int)sizeof(buf)) {
- /* Somehow snprintf failed to write to the buffer,
- * remove the header so something useful is output. */
- header_len = 0;
- }
- /* Make sure buffer is NUL terminated */
- buf[header_len] = '\0';
- text_len = vsnprintf(buf + header_len, sizeof(buf) - header_len,
- format, args);
- if (text_len < 0 || text_len + header_len >= (int)sizeof(buf)) {
- /* Truncated log output. On some platforms a -1 return value means
- * that the output was truncated. */
- text_len = sizeof(buf) - header_len;
- }
- if (header_len + text_len + sizeof(USBI_LOG_LINE_END) >= sizeof(buf)) {
- /* Need to truncate the text slightly to fit on the terminator. */
- text_len -= (header_len + text_len + sizeof(USBI_LOG_LINE_END)) - sizeof(buf);
- }
- strcpy(buf + header_len + text_len, USBI_LOG_LINE_END);
-
- usbi_log_str(level, buf);
-}
-
-void usbi_log(struct libusb_context *ctx, enum libusb_log_level level,
- const char *function, const char *format, ...)
-{
- va_list args;
-
- va_start (args, format);
- usbi_log_v(ctx, level, function, format, args);
- va_end (args);
-}
-
-#endif /* ENABLE_LOGGING */
-
-/** \ingroup libusb_misc
- * Returns a constant NULL-terminated string with the ASCII name of a libusb
- * error or transfer status code. The caller must not free() the returned
- * string.
- *
- * \param error_code The \ref libusb_error or libusb_transfer_status code to
- * return the name of.
- * \returns The error name, or the string **UNKNOWN** if the value of
- * error_code is not a known error / status code.
- */
-DEFAULT_VISIBILITY const char * LIBUSB_CALL libusb_error_name(int error_code)
-{
- switch (error_code) {
- case LIBUSB_ERROR_IO:
- return "LIBUSB_ERROR_IO";
- case LIBUSB_ERROR_INVALID_PARAM:
- return "LIBUSB_ERROR_INVALID_PARAM";
- case LIBUSB_ERROR_ACCESS:
- return "LIBUSB_ERROR_ACCESS";
- case LIBUSB_ERROR_NO_DEVICE:
- return "LIBUSB_ERROR_NO_DEVICE";
- case LIBUSB_ERROR_NOT_FOUND:
- return "LIBUSB_ERROR_NOT_FOUND";
- case LIBUSB_ERROR_BUSY:
- return "LIBUSB_ERROR_BUSY";
- case LIBUSB_ERROR_TIMEOUT:
- return "LIBUSB_ERROR_TIMEOUT";
- case LIBUSB_ERROR_OVERFLOW:
- return "LIBUSB_ERROR_OVERFLOW";
- case LIBUSB_ERROR_PIPE:
- return "LIBUSB_ERROR_PIPE";
- case LIBUSB_ERROR_INTERRUPTED:
- return "LIBUSB_ERROR_INTERRUPTED";
- case LIBUSB_ERROR_NO_MEM:
- return "LIBUSB_ERROR_NO_MEM";
- case LIBUSB_ERROR_NOT_SUPPORTED:
- return "LIBUSB_ERROR_NOT_SUPPORTED";
- case LIBUSB_ERROR_OTHER:
- return "LIBUSB_ERROR_OTHER";
-
- case LIBUSB_TRANSFER_ERROR:
- return "LIBUSB_TRANSFER_ERROR";
- case LIBUSB_TRANSFER_TIMED_OUT:
- return "LIBUSB_TRANSFER_TIMED_OUT";
- case LIBUSB_TRANSFER_CANCELLED:
- return "LIBUSB_TRANSFER_CANCELLED";
- case LIBUSB_TRANSFER_STALL:
- return "LIBUSB_TRANSFER_STALL";
- case LIBUSB_TRANSFER_NO_DEVICE:
- return "LIBUSB_TRANSFER_NO_DEVICE";
- case LIBUSB_TRANSFER_OVERFLOW:
- return "LIBUSB_TRANSFER_OVERFLOW";
-
- case 0:
- return "LIBUSB_SUCCESS / LIBUSB_TRANSFER_COMPLETED";
- default:
- return "**UNKNOWN**";
- }
-}
-
-/** \ingroup libusb_misc
- * Returns a pointer to const struct libusb_version with the version
- * (major, minor, micro, nano and rc) of the running library.
- */
-DEFAULT_VISIBILITY
-const struct libusb_version * LIBUSB_CALL libusb_get_version(void)
-{
- return &libusb_version_internal;
-}
projects / rtmpclient.git / blobdiff